We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3L ECC UDIMM sticks, 240-pin, 1Rx8, 1.35V

A-Tech

A-Tech 16GB (4x4GB) DDR3L 1600 ECC UDIMM 1Rx8 1.35V Server RAM

SKU CH-CHKZ-4CJ6K

A 16 GB quad-channel kit of DDR3L 1600 ECC unbuffered DIMMs running at 1.35 V for servers and workstations

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection guards data integrity in server workloads
  • 16 GB quad-channel kit (4 × 4 GB) scales memory capacity
  • DDR3L 1600 MHz at 1.35 V reduces power draw
  • Unbuffered 240-pin DIMM fits compatible server boards
  • Single-rank 1Rx8 organisation supports dense memory configurations

Server & workstation memory kit

This 16 GB kit contains four 4 GB DDR3L 1600 ECC UDIMM modules built for servers and workstations only. It is not compatible with desktop or laptop computers. The quad-channel configuration helps speed up loading times and improves responsiveness under heavier workloads. Each module is tested for dependable operation in supported systems.

Low-voltage DDR3L 240-pin DIMMs

Modules run at 1.35 V and can also operate at 1.5 V for broader platform compatibility. The 240-pin DIMM form factor fits DDR3/DDR3L server slots that accept ECC unbuffered memory. Single-rank 1Rx8 organisation with CL11 latency supports stable data integrity in multi-channel layouts. Major-brand chips are used throughout the kit.

Upgrade for DDR3 ECC UDIMM platforms

Replaces smaller-capacity DDR3 ECC unbuffered kits or fills empty slots in compatible servers and workstations. The jump is worth it when your workload needs more than the current memory ceiling allows and the system supports quad-channel DDR3L 1600 operation. Verify your platform’s qualified-vendor list before installing.

Highlights

  • ECC protection guards data integrity in server workloads
  • 16 GB quad-channel kit (4 × 4 GB) scales memory capacity
  • DDR3L 1600 MHz at 1.35 V reduces power draw
  • Unbuffered 240-pin DIMM fits compatible server boards
  • Single-rank 1Rx8 organisation supports dense memory configurations

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3L-12800E
Capacity16GB (4 x 4GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What speed and bandwidth does the PC3L-12800 DDR3L interface deliver in practice?

The kit runs at 1600 MHz with a peak transfer rate of 12800 MB/s per module, operating at 1.35 V for DDR3L low-voltage compatibility.

What physical slot and pin count does this 240-pin DIMM kit require?

Each 4 GB module uses a standard 240-pin DDR3 DIMM slot; the quad-channel kit occupies four such slots on a server or workstation motherboard.

How are the four modules installed for quad-channel operation, and what step is often missed?

Populate all four slots following the motherboard’s channel guide, ensure each DIMM clicks fully into its latch, and verify the BIOS detects 16 GB at 1600 MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.