A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 1.35V Server RAM
- 4GB
- DDR3L 1600 (PC3L 12…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
4GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency for servers and workstations
Capacity 4GB
This 4GB DDR4 2133 ECC registered DIMM is built for servers and workstations that require error-correcting memory. It operates at 1.2V with a CAS latency of 15 and uses a single-rank x8 organisation. The module is not compatible with standard desktop or laptop computers.
The jump is worth it when your workload demands data integrity through ECC and the platform requires registered DIMMs. Adding this module increases the memory pool for virtualisation, database or compute tasks where single-bit error correction prevents silent data corruption. Systems that only accept unbuffered memory cannot use this module.
Align the notch on the 288-pin module with the slot key, press firmly until the retention clips lock, and follow the system manual for channel population rules. Common issues include mixing registered and unbuffered DIMMs, exceeding the maximum rank count per channel, or installing in unsupported desktop boards that physically accept the module but will not POST.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2133P-R |
| Part Number | AT4G1D4D2133RS8N12V |
| Capacity | 4GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The module uses the standard 288-pin DDR4 DIMM form factor and 1.2 V voltage, so it fits any server or workstation slot designed for DDR4 registered ECC memory.
Install the module in the slot order shown in your system manual; the common mistake is placing a single module in the wrong channel, which can prevent the server from posting.
ECC corrects single-bit errors automatically; if your system logs show uncorrectable errors or repeated correctable-error thresholds being exceeded, plan a replacement.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?