BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278311BTC
Varastossa
A-Tech
A-Tech 8GB DDR3 1600MHz CL11 1.5V Desktop RAM for G.Skill F3-1600C9D-16GXM F3-1600C9Q-32GXM
8GB DDR3 1600MHz CL11 1.5V desktop DIMM replacement for G.Skill F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM modules
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- Adds 8 GB of DDR3 capacity for smoother multitasking
- Runs at 1600 MHz for faster data transfer
- CL11 latency keeps response times low
- Operates at standard 1.5 V DDR3 voltage
- 240-pin DIMM fits compatible desktop slots
What this memory replaces
This 8 GB DDR3 module is built as a direct replacement for G.Skill kits F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM. It fits standard desktop DIMM slots and runs at 1.50 V. The module uses major-brand chips and is tested at 1600 MHz.
DDR3 speed ceiling
DDR3 tops out at 1600 MT/s in the PC3-12800 rating, so this stick cannot exceed that transfer rate. The 240-pin DIMM interface fixes the electrical and mechanical limits. CAS latency of 11 is the timing floor for this frequency grade.
Single spec that decides fit
The 262-pin DIMM form factor combined with non-ECC unbuffered operation determines whether the module seats and initialises in your motherboard. Verify that your board accepts 8 GB DDR3 1600 CL11 1.5 V unbuffered DIMMs before ordering.
Kohokohdat
- Adds 8 GB of DDR3 capacity for smoother multitasking
- Runs at 1600 MHz for faster data transfer
- CL11 latency keeps response times low
- Operates at standard 1.5 V DDR3 voltage
- 240-pin DIMM fits compatible desktop slots
Tekniset tiedot
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM |
| Recommend Use | Compatible Replacement for G.Skill F3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM |
Kysymyksiä tästä tuotteesta
Will this 8 GB DDR3 1600 MHz module fit my desktop motherboard?
The module uses a 240-pin DIMM form factor, which is the standard for desktop DDR3. Check your motherboard manual to confirm it supports DDR3 DIMMs and the maximum capacity per slot.
Can I mix this CL11 1.5 V stick with my existing CL9 memory?
Mixing different CAS latencies is possible, but the system will run all modules at the slowest timing. For best stability, use modules with matching speed, voltage and latency.
Is this a direct replacement for G.Skill part numbers F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM?
Yes, the module is specified as a compatible replacement for those three G.Skill part numbers, matching the DDR3 1600 MHz PC3-12800 specification.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
