Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips, no heat spreader, 240-pin DIMM

A-Tech

A-Tech 8GB DDR3 1600MHz CL11 1.5V Desktop RAM for G.Skill F3-1600C9D-16GXM F3-1600C9Q-32GXM

SKU CH-PMEZ-V5E1A

8GB DDR3 1600MHz CL11 1.5V desktop DIMM replacement for G.Skill F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM modules

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Adds 8 GB of DDR3 capacity for smoother multitasking
  • Runs at 1600 MHz for faster data transfer
  • CL11 latency keeps response times low
  • Operates at standard 1.5 V DDR3 voltage
  • 240-pin DIMM fits compatible desktop slots

What this memory replaces

This 8 GB DDR3 module is built as a direct replacement for G.Skill kits F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM. It fits standard desktop DIMM slots and runs at 1.50 V. The module uses major-brand chips and is tested at 1600 MHz.

DDR3 speed ceiling

DDR3 tops out at 1600 MT/s in the PC3-12800 rating, so this stick cannot exceed that transfer rate. The 240-pin DIMM interface fixes the electrical and mechanical limits. CAS latency of 11 is the timing floor for this frequency grade.

Single spec that decides fit

The 262-pin DIMM form factor combined with non-ECC unbuffered operation determines whether the module seats and initialises in your motherboard. Verify that your board accepts 8 GB DDR3 1600 CL11 1.5 V unbuffered DIMMs before ordering.

Punti di forza

  • Adds 8 GB of DDR3 capacity for smoother multitasking
  • Runs at 1600 MHz for faster data transfer
  • CL11 latency keeps response times low
  • Operates at standard 1.5 V DDR3 voltage
  • 240-pin DIMM fits compatible desktop slots

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM
Recommend UseCompatible Replacement for G.Skill F3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM

Domande su questo articolo

Will this 8 GB DDR3 1600 MHz module fit my desktop motherboard?

The module uses a 240-pin DIMM form factor, which is the standard for desktop DDR3. Check your motherboard manual to confirm it supports DDR3 DIMMs and the maximum capacity per slot.

Can I mix this CL11 1.5 V stick with my existing CL9 memory?

Mixing different CAS latencies is possible, but the system will run all modules at the slowest timing. For best stability, use modules with matching speed, voltage and latency.

Is this a direct replacement for G.Skill part numbers F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM?

Yes, the module is specified as a compatible replacement for those three G.Skill part numbers, matching the DDR3 1600 MHz PC3-12800 specification.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.