Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green circuit board with black memory chips, no heat spreader, 240-pin DIMM

A-Tech

A-Tech 8GB DDR3 1600MHz CL11 1.5V Desktop RAM for G.Skill F3-1600C9D-16GXM F3-1600C9Q-32GXM

SKU CH-PMEZ-V5E1A

8GB DDR3 1600MHz CL11 1.5V desktop DIMM replacement for G.Skill F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM modules

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Adds 8 GB of DDR3 capacity for smoother multitasking
  • Runs at 1600 MHz for faster data transfer
  • CL11 latency keeps response times low
  • Operates at standard 1.5 V DDR3 voltage
  • 240-pin DIMM fits compatible desktop slots

What this memory replaces

This 8 GB DDR3 module is built as a direct replacement for G.Skill kits F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM. It fits standard desktop DIMM slots and runs at 1.50 V. The module uses major-brand chips and is tested at 1600 MHz.

DDR3 speed ceiling

DDR3 tops out at 1600 MT/s in the PC3-12800 rating, so this stick cannot exceed that transfer rate. The 240-pin DIMM interface fixes the electrical and mechanical limits. CAS latency of 11 is the timing floor for this frequency grade.

Single spec that decides fit

The 262-pin DIMM form factor combined with non-ECC unbuffered operation determines whether the module seats and initialises in your motherboard. Verify that your board accepts 8 GB DDR3 1600 CL11 1.5 V unbuffered DIMMs before ordering.

Puntos fuertes

  • Adds 8 GB of DDR3 capacity for smoother multitasking
  • Runs at 1600 MHz for faster data transfer
  • CL11 latency keeps response times low
  • Operates at standard 1.5 V DDR3 voltage
  • 240-pin DIMM fits compatible desktop slots

Especificaciones

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM
Recommend UseCompatible Replacement for G.Skill F3-1600C9D-16GXM, F3-1600C9Q-32GXM, F3-1600C9S-8GXM

Preguntas sobre este artículo

Will this 8 GB DDR3 1600 MHz module fit my desktop motherboard?

The module uses a 240-pin DIMM form factor, which is the standard for desktop DDR3. Check your motherboard manual to confirm it supports DDR3 DIMMs and the maximum capacity per slot.

Can I mix this CL11 1.5 V stick with my existing CL9 memory?

Mixing different CAS latencies is possible, but the system will run all modules at the slowest timing. For best stability, use modules with matching speed, voltage and latency.

Is this a direct replacement for G.Skill part numbers F3-1600C9D-16GXM, F3-1600C9Q-32GXM and F3-1600C9S-8GXM?

Yes, the module is specified as a compatible replacement for those three G.Skill part numbers, matching the DDR3 1600 MHz PC3-12800 specification.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.