NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8GB DDR4 3200MHz desktop memory module, 288-pin unbuffered DIMM at 1.20V for AMD and Intel systems
This A-Tech module provides 8GB of DDR4 memory for desktop computers. It operates at 3200MHz with a PC4-25600 rating and runs at the standard 1.20V voltage. The unbuffered, non-ECC DIMM is designed as a compatible replacement for the Samsung M378A1G44AB0-CWE part.
The module uses the standard 288-pin DDR4 DIMM form factor, so it only fits motherboards with matching slots. Systems that require registered or ECC memory cannot use this unbuffered stick. Maximum speed is set by the platform's memory controller and may run below the tested 3200MHz frequency.
The memory is organised as a single-rank 1Rx16 configuration, which determines how the memory controller addresses the chips. Builders populating multiple slots should check their motherboard's qualified vendor list for rank limits. This specification decides whether the module works in a specific multi-channel setup.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
This listing is a single 8 GB DDR4 3200 MHz DIMM in a 1Rx16 layout. If your board has free slots you can add more identical modules later to reach the capacity you need.
The module runs at 3200 MT/s at the standard 1.2 V DDR4 voltage, giving a peak bandwidth of PC4-25600. Real-world throughput depends on your CPU memory controller and whether the board can run the XMP or JEDEC profile at that speed.
The stick uses the standard 288-pin DDR4 DIMM form factor and is rated for 3200 MHz (PC4-25600) at 1.2 V. Your motherboard must support DDR4 and the 3200 MT/s data rate; otherwise it will down-clock to the highest speed the board allows.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?