EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8GB DDR4 3200MHz desktop memory module, 288-pin unbuffered DIMM at 1.20V for AMD and Intel systems
This A-Tech module provides 8GB of DDR4 memory for desktop computers. It operates at 3200MHz with a PC4-25600 rating and runs at the standard 1.20V voltage. The unbuffered, non-ECC DIMM is designed as a compatible replacement for the Samsung M378A1G44AB0-CWE part.
The module uses the standard 288-pin DDR4 DIMM form factor, so it only fits motherboards with matching slots. Systems that require registered or ECC memory cannot use this unbuffered stick. Maximum speed is set by the platform's memory controller and may run below the tested 3200MHz frequency.
The memory is organised as a single-rank 1Rx16 configuration, which determines how the memory controller addresses the chips. Builders populating multiple slots should check their motherboard's qualified vendor list for rank limits. This specification decides whether the module works in a specific multi-channel setup.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
This listing is a single 8 GB DDR4 3200 MHz DIMM in a 1Rx16 layout. If your board has free slots you can add more identical modules later to reach the capacity you need.
The module runs at 3200 MT/s at the standard 1.2 V DDR4 voltage, giving a peak bandwidth of PC4-25600. Real-world throughput depends on your CPU memory controller and whether the board can run the XMP or JEDEC profile at that speed.
The stick uses the standard 288-pin DDR4 DIMM form factor and is rated for 3200 MHz (PC4-25600) at 1.2 V. Your motherboard must support DDR4 and the 3200 MT/s data rate; otherwise it will down-clock to the highest speed the board allows.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟