Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
8GB DDR4 3200MHz desktop memory module, 288-pin unbuffered DIMM at 1.20V for AMD and Intel systems
This A-Tech module provides 8GB of DDR4 memory for desktop computers. It operates at 3200MHz with a PC4-25600 rating and runs at the standard 1.20V voltage. The unbuffered, non-ECC DIMM is designed as a compatible replacement for the Samsung M378A1G44AB0-CWE part.
The module uses the standard 288-pin DDR4 DIMM form factor, so it only fits motherboards with matching slots. Systems that require registered or ECC memory cannot use this unbuffered stick. Maximum speed is set by the platform's memory controller and may run below the tested 3200MHz frequency.
The memory is organised as a single-rank 1Rx16 configuration, which determines how the memory controller addresses the chips. Builders populating multiple slots should check their motherboard's qualified vendor list for rank limits. This specification decides whether the module works in a specific multi-channel setup.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
This listing is a single 8 GB DDR4 3200 MHz DIMM in a 1Rx16 layout. If your board has free slots you can add more identical modules later to reach the capacity you need.
The module runs at 3200 MT/s at the standard 1.2 V DDR4 voltage, giving a peak bandwidth of PC4-25600. Real-world throughput depends on your CPU memory controller and whether the board can run the XMP or JEDEC profile at that speed.
The stick uses the standard 288-pin DDR4 DIMM form factor and is rated for 3200 MHz (PC4-25600) at 1.2 V. Your motherboard must support DDR4 and the 3200 MT/s data rate; otherwise it will down-clock to the highest speed the board allows.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?