Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver tower duplicator with 31 SD card slots and LCD display

Acumen Disc

Acumen Disc 1-to-31 SD Duplicator AD31-SDC 33MB/s

SKU CH-0J7V-94M0E

Standalone SD and MicroSD duplicator copies to 31 targets at 33 MB/s with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Target1 to 31
  • ControllerAcumen Disc
  • Supported MediaSecure Digital (SD) / MicroSD TF
  • Data Transfer Rate33MB/s
  • Data Source ROM1 SD Slot for Source Reading

Target 1 to 31

  • Copies to 31 cards simultaneously at 33 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Standalone operation needs no PC or software for secure copying
  • Four erase modes include DoD 3-pass and 7-pass sanitisation
  • 20 × 2 LCD and 128 MB buffer enable asynchronous multi-core duplication

1-to-31 SD Duplicator

The Acumen Disc AD31-SDC is a standalone SD and MicroSD duplicator with one source slot and thirty-one destination slots. It copies Secure Digital and MicroSD cards without adapters at up to 33 MB/s per channel. The unit operates independently of any computer for secure, offline duplication.

Check media and power before use

Ensure your source and target cards are standard SD, SDHC, SDXC or MicroSD formats supported by the dedicated slots. The duplicator requires an AC supply of 115-230 V at 50/60 Hz. No host software or computer connection is needed for operation.

Replaces manual single-slot copying

This device upgrades from copying cards one at a time to thirty-one simultaneous targets with asynchronous operation. The jump is worth it when you need DoD-compliant 3-pass or 7-pass sanitisation, quick or full erase modes, and FAT or FAT32 formatting in a single standalone workflow.

Kohokohdat

  • Copies to 31 cards simultaneously at 33 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Standalone operation needs no PC or software for secure copying
  • Four erase modes include DoD 3-pass and 7-pass sanitisation
  • 20 × 2 LCD and 128 MB buffer enable asynchronous multi-core duplication

Tekniset tiedot

BrandAcumen Disc
ModelAcumen Disc SD
Part NumberAD31-SDC
TypeSD/MicroSD Duplicator
Target1 to 31
ControllerAcumen Disc
Supported MediaSecure Digital (SD) / MicroSD TF
Data Transfer Rate33MB/s
Data Source ROM1 SD Slot for Source Reading
Data Destination Burner31 SD Slots for SD to SD Copy
Display20 x 2 LCD
Operating TypeStandalone
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the AD31-SDC include the SD and MicroSD cards I need to start copying?

The duplicator provides one source slot and 31 destination slots; media cards themselves are not included and must be purchased separately.

Should I pick the 33 MB/s or 35 MB/s figure when comparing duplicators?

The specification lists a 33 MB/s transfer rate; the 35 MB/s value appears only in promotional text and represents a peak that depends on the card used.

What does the 33 MB/s rate mean when I am copying to all 31 slots at once?

Each of the 31 channels runs independently at up to 33 MB/s from the 128 MB internal buffer, so total aggregate throughput scales with the number of active slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.