Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Standalone SD and microSD duplicator with one source slot and seven target slots, 20x2 LCD, silver chassis

Acumen Disc

Acumen Disc AD07-SDC 1-to-7 SD Duplicator 33MB/s

SKU CH-52YQ-AE6GW

Standalone duplicator copies one SD or microSD card to seven targets at up to 33 MB/s with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Target1 to 7
  • ControllerAcumen Disc
  • Supported MediaSecure Digital (SD) / MicroSD TF
  • Data Transfer Rate33MB/s
  • Data Source ROM1 SD Slot for Source Reading

Target 1 to 7

  • Copies up to 7 cards simultaneously at 33 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Three DoD-compliant erase modes meet 5220.22-M standards
  • Standalone operation with 20 × 2 LCD needs no PC
  • Asynchronous copy from 128 MB buffer lets each channel run independently

Acumen Disc AD07-SDC SD Duplicator

The Acumen Disc AD07-SDC is a standalone SD and MicroSD duplicator that copies one source card to seven targets simultaneously. It operates without a host computer, so no software installation is required. The unit suits IT departments, forensic labs, and content creators who need secure, offline duplication of flash media.

Standalone tower with dedicated slots

The tower chassis provides one dedicated source slot and seven destination slots, accepting both full-size SD and MicroSD cards directly without adapters. A 20 x 2 LCD panel displays copy progress and menu options. Power is drawn from a universal 115-230 V AC supply at 50/60 Hz, and the built-in 128 MB buffer enables asynchronous operation so each channel copies independently.

33 MB/s copy speed with DoD erase

The controller delivers a data transfer rate of 33 MB/s per channel and supports two copy modes: System and Files for quick duplication, or Whole Media for bit-for-bit imaging. Four erase modes include Quick Erase, Full Erase, and DoD 3-pass and 7-pass sanitisation compliant with the 5220.22-M standard. Format options cover Auto, FAT, and FAT32. This duplicator does not support CFexpress, CFast, or USB-attached media.

Kohokohdat

  • Copies up to 7 cards simultaneously at 33 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Three DoD-compliant erase modes meet 5220.22-M standards
  • Standalone operation with 20 × 2 LCD needs no PC
  • Asynchronous copy from 128 MB buffer lets each channel run independently

Tekniset tiedot

BrandAcumen Disc
ModelAcumen Disc SD
Part NumberAD07-SDC
TypeSD/MicroSD Duplicator
Target1 to 7
ControllerAcumen Disc
Supported MediaSecure Digital (SD) / MicroSD TF
Data Transfer Rate33MB/s
Data Source ROM1 SD Slot for Source Reading
Data Destination Burner7 SD Slots for SD to SD Copy
Display20 x 2 LCD
Operating TypeStandalone
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What SD interface speed does the duplicator's 33 MB/s transfer rate actually cap at?

The unit moves data at up to 33 MB/s per channel, so the practical ceiling is the card's own sustained write speed — faster SDHC or SDXC cards will hit that limit, slower ones will not.

What physical slots must the source and target cards fit into?

One dedicated full-size SD slot holds the source; seven dedicated full-size SD slots plus seven MicroSD slots hold the targets — no adapters required.

How is the duplicator set up and which step do users most often miss?

Connect the 115-230 V AC supply, insert the source card in the single source slot, insert target cards in any of the seven destination slots, then choose copy or erase mode on the 20 x 2 LCD — the step most often missed is confirming the correct mode before starting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.