Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Standalone SD and microSD duplicator with one source slot and seven target slots, 20x2 LCD, silver chassis

Acumen Disc

Acumen Disc AD07-SDC 1-to-7 SD Duplicator 33MB/s

SKU CH-52YQ-AE6GW

Standalone duplicator copies one SD or microSD card to seven targets at up to 33 MB/s with DoD-compliant erase modes

  • TypeSD/MicroSD Duplicator
  • Target1 to 7
  • ControllerAcumen Disc
  • Supported MediaSecure Digital (SD) / MicroSD TF
  • Data Transfer Rate33MB/s
  • Data Source ROM1 SD Slot for Source Reading

Target 1 to 7

  • Copies up to 7 cards simultaneously at 33 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Three DoD-compliant erase modes meet 5220.22-M standards
  • Standalone operation with 20 × 2 LCD needs no PC
  • Asynchronous copy from 128 MB buffer lets each channel run independently

Acumen Disc AD07-SDC SD Duplicator

The Acumen Disc AD07-SDC is a standalone SD and MicroSD duplicator that copies one source card to seven targets simultaneously. It operates without a host computer, so no software installation is required. The unit suits IT departments, forensic labs, and content creators who need secure, offline duplication of flash media.

Standalone tower with dedicated slots

The tower chassis provides one dedicated source slot and seven destination slots, accepting both full-size SD and MicroSD cards directly without adapters. A 20 x 2 LCD panel displays copy progress and menu options. Power is drawn from a universal 115-230 V AC supply at 50/60 Hz, and the built-in 128 MB buffer enables asynchronous operation so each channel copies independently.

33 MB/s copy speed with DoD erase

The controller delivers a data transfer rate of 33 MB/s per channel and supports two copy modes: System and Files for quick duplication, or Whole Media for bit-for-bit imaging. Four erase modes include Quick Erase, Full Erase, and DoD 3-pass and 7-pass sanitisation compliant with the 5220.22-M standard. Format options cover Auto, FAT, and FAT32. This duplicator does not support CFexpress, CFast, or USB-attached media.

Přednosti

  • Copies up to 7 cards simultaneously at 33 MB/s
  • Two dedicated slots accept SD and MicroSD without adapters
  • Three DoD-compliant erase modes meet 5220.22-M standards
  • Standalone operation with 20 × 2 LCD needs no PC
  • Asynchronous copy from 128 MB buffer lets each channel run independently

Specifikace

BrandAcumen Disc
ModelAcumen Disc SD
Part NumberAD07-SDC
TypeSD/MicroSD Duplicator
Target1 to 7
ControllerAcumen Disc
Supported MediaSecure Digital (SD) / MicroSD TF
Data Transfer Rate33MB/s
Data Source ROM1 SD Slot for Source Reading
Data Destination Burner7 SD Slots for SD to SD Copy
Display20 x 2 LCD
Operating TypeStandalone
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz
Package Contentssee pictures for details

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What SD interface speed does the duplicator's 33 MB/s transfer rate actually cap at?

The unit moves data at up to 33 MB/s per channel, so the practical ceiling is the card's own sustained write speed — faster SDHC or SDXC cards will hit that limit, slower ones will not.

What physical slots must the source and target cards fit into?

One dedicated full-size SD slot holds the source; seven dedicated full-size SD slots plus seven MicroSD slots hold the targets — no adapters required.

How is the duplicator set up and which step do users most often miss?

Connect the 115-230 V AC supply, insert the source card in the single source slot, insert target cards in any of the seven destination slots, then choose copy or erase mode on the 20 x 2 LCD — the step most often missed is confirming the correct mode before starting.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.