Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm square case fan with matte finish, no LED lighting

ASUS

ASUS ROG Strix XF120/XF120A1/BK// 120mm case fan

SKU CH-NQ34-MB5B8 MPN ROG Strix XF120/XF120A1/BK//

A 120 mm magnetic-levitation case fan delivering 62.5 CFM at 22.5 dBA with a 400,000-hour lifespan

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeMagnetic-levitation
  • Whisper-quiet operation at 22.5 dBA for silent builds
  • MagLev bearing delivers 400000-hour lifespan with minimal friction
  • 5 CFM airflow balances case, radiator and CPU cooling
  • 250-1800 RPM range allows precise PWM fan curves
  • Anti-vibration pads and mounts eliminate rattling noise

Single 120 mm magnetic-levitation fan

The ASUS ROG Strix XF120 is a 120 mm case fan built around a magnetic-levitation bearing rated for 400000 hours of operation. It spins between 250 and 1800 RPM and delivers 62.5 CFM at a quoted 22.5 dBA. The 4-pin PWM connector allows motherboard speed control without a separate fan controller. It suits builders who want one versatile fan for chassis intake, exhaust, radiator or CPU cooler duty.

MagLev bearing, grooved blades

Magnetic-levitation stabilises the rotor to cut friction and noise, while a minimised blade hub widens the airflow channel. Grooved fan blades and a direct-flow frame reduce turbulence, improving both airflow throughput and static pressure. Anti-vibration pads on the corners dampen vibration transfer to the case, helping the fan stay quiet at higher speeds.

Check 120 mm mounting points and 4-pin PWM header

Verify your case or radiator has 120 mm mounting holes with 25 mm clearance for the fan thickness. Ensure the motherboard or fan hub provides a 4-pin PWM header; the fan will not run from a 3-pin voltage-controlled header without losing speed control. The non-LED black finish suits stealth builds but adds no lighting if you need RGB synchronization.

Kohokohdat

  • Whisper-quiet operation at 22.5 dBA for silent builds
  • MagLev bearing delivers 400000-hour lifespan with minimal friction
  • 5 CFM airflow balances case, radiator and CPU cooling
  • 250-1800 RPM range allows precise PWM fan curves
  • Anti-vibration pads and mounts eliminate rattling noise

Tekniset tiedot

BrandASUS
Model90DA0010-B08000
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeMagnetic-levitation
RPM1800 RPM (+/- 10%)
Air Flow62.5 CFM
Noise Level22.5 dBA
ColorBlack
LEDNon-LED
FeaturesOptimal blend of airflow and static pressure: Enables use as a PC case, radiator or CPU cooler fan.
MagLev bearing: Stabilizes rotor for reduced friction and noise, and offers 400,000-hour life span.
Minimized acoustic profile: Whisper-quiet, 22.5 dB(A) cooling performance and tuned to deliver a smooth and stable sound frequency.
Aerodynamic fan blade and frame design: Minimizes turbulence and maximizes airflow.
Extensive operating range: 250 - 1800 rpm range for more flexibility and to create a quiet fan curve (fan spins down at 0% PWM utilization).
Anti-vibration pads and mounts: R
Dimensions120.00 x 120.00 x 25.00 mm
Lähetyspaino0.27 kg
Pakkauksen mitat229 × 147 × 31 mm

Kysymyksiä tästä tuotteesta

What does the 4-pin PWM connector let me control on this fan?

The 4-pin PWM connector allows speed control from 250 to 1800 RPM, and the fan can spin down completely at 0% PWM duty cycle.

What clearance does the 120mm by 25mm frame need to fit in my case?

It requires a standard 120mm mounting grid with at least 25mm depth; the anti-vibration pads add minimal extra height.

How do I install the anti-vibration mounts without stripping the threads?

Push the rubber mounts through the fan holes first, then insert the supplied screws through the case and into the mounts — do not overtighten.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.