Athena Power AP-MFATX50P8 500W Flex ATX server power supply
- Flex ATX
- 500W
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Athena Power
Flex ATX 400 W unit with 80+ Bronze efficiency for 1U and Mini-ITX builds
Option 400W
The Athena Power AP-MFATX40P8 is a single 400 W Flex ATX power supply built for 1U rackmounts and Mini-ITX chassis. It carries 80 PLUS Bronze certification and active PFC, delivering up to 400 W across dual +12 V rails rated at 16 A each. A 40 mm fan with smart auto-speed control handles cooling.
Installers fitting a 1U or Mini-ITX build that requires PCIe power connectors and an EPS12V 8-pin will find the connectors and form factor matched. Builders who need redundant supplies or higher total wattage for multi-GPU configurations should look at other form factors.
The two +12V rails each provide 16 A, and the unit includes two PCIe 6-pin connectors for add-in cards. This rail layout and connector set determine whether the supply can support the intended graphics or compute cards.
| Brand | Athena Power |
|---|---|
| Model | AP-MFATX40P8 |
| Type | Flex ATX |
| Single/Redundant | Single |
| Maximum Power | 400W |
| Main Connector | 20+4Pin |
| Output Current | +5V@15A, [email protected] , +12V1@16A, -12V2@16A, [email protected] , +3.3V@15A, [email protected] |
| Input Voltage | 88/264 Volts AC |
| Input Frequency Range | 50/60 Hz |
| Fans | 1 |
| MTBF | 100,000 Hours on Maximum Load at +25°C |
| Features | 80PLUS Bronze Certification Smart Auto Fan Speed Controller Active PFC and the Remote ON/OFF Designed for 1UITX rackmounts, Mini-ITX chassis Connectors: ATX Connector 24(20+4) pin x 1 EPS-12V 8 (P4-12V 4 pin +4) pin x 1 EPS/P4 (P4+4) pin x 1 PCIE 6 pin x 2 SATA 15 pin x 3 Molex 4 pin x 2 Floppy 4 pin x 1 |
| Dimensions | 3.2" x 1.7" x 6" |
| Weight | 2.00 lbs. |
| Lähetyspaino | 1.21 kg |
| Pakkauksen mitat | 251 × 160 × 79 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the 3.2" x 1.7" x 6" Flex ATX form factor is designed for 1U rackmounts and Mini-ITX chassis, matching the standard mounting holes and clearance for those enclosures.
Connect the 24-pin ATX cable to the main board socket and the 8-pin EPS12V cable to the CPU power header; the 4+4-pin EPS split lets you use either 4-pin or 8-pin motherboard sockets.
Clean the fan intake every 6–12 months to maintain airflow; the 100,000-hour MTBF at 25 °C indicates the unit should run for many years before a full replacement is needed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?