Athena Power AP-MFATX50P8 500W Flex ATX server power supply
- Flex ATX
- 500W
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Athena Power
Flex ATX 400 W unit with 80+ Bronze efficiency for 1U and Mini-ITX builds
Option 400W
The Athena Power AP-MFATX40P8 is a single 400 W Flex ATX power supply built for 1U rackmounts and Mini-ITX chassis. It carries 80 PLUS Bronze certification and active PFC, delivering up to 400 W across dual +12 V rails rated at 16 A each. A 40 mm fan with smart auto-speed control handles cooling.
Installers fitting a 1U or Mini-ITX build that requires PCIe power connectors and an EPS12V 8-pin will find the connectors and form factor matched. Builders who need redundant supplies or higher total wattage for multi-GPU configurations should look at other form factors.
The two +12V rails each provide 16 A, and the unit includes two PCIe 6-pin connectors for add-in cards. This rail layout and connector set determine whether the supply can support the intended graphics or compute cards.
| Brand | Athena Power |
|---|---|
| Model | AP-MFATX40P8 |
| Type | Flex ATX |
| Single/Redundant | Single |
| Maximum Power | 400W |
| Main Connector | 20+4Pin |
| Output Current | +5V@15A, [email protected] , +12V1@16A, -12V2@16A, [email protected] , +3.3V@15A, [email protected] |
| Input Voltage | 88/264 Volts AC |
| Input Frequency Range | 50/60 Hz |
| Fans | 1 |
| MTBF | 100,000 Hours on Maximum Load at +25°C |
| Features | 80PLUS Bronze Certification Smart Auto Fan Speed Controller Active PFC and the Remote ON/OFF Designed for 1UITX rackmounts, Mini-ITX chassis Connectors: ATX Connector 24(20+4) pin x 1 EPS-12V 8 (P4-12V 4 pin +4) pin x 1 EPS/P4 (P4+4) pin x 1 PCIE 6 pin x 2 SATA 15 pin x 3 Molex 4 pin x 2 Floppy 4 pin x 1 |
| Dimensions | 3.2" x 1.7" x 6" |
| Weight | 2.00 lbs. |
| Prepravná hmotnosť | 1.21 kg |
| Rozmery balenia | 251 × 160 × 79 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Yes, the 3.2" x 1.7" x 6" Flex ATX form factor is designed for 1U rackmounts and Mini-ITX chassis, matching the standard mounting holes and clearance for those enclosures.
Connect the 24-pin ATX cable to the main board socket and the 8-pin EPS12V cable to the CPU power header; the 4+4-pin EPS split lets you use either 4-pin or 8-pin motherboard sockets.
Clean the fan intake every 6–12 months to maintain airflow; the 100,000-hour MTBF at 25 °C indicates the unit should run for many years before a full replacement is needed.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?