NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Axiom
16GB DDR3 1600 ECC registered DIMM running at 1.35V for server stability
This Axiom 7104199-AX module provides 16 GB of DDR3 SDRAM built for servers and workstations that require registered ECC memory. It operates at 1600 MHz with a 1.35 V supply and uses the standard 240-pin DIMM form factor.
The module implements registered signal processing combined with error-correcting code to reduce electrical load on the memory controller and detect single-bit errors. This configuration is mandatory for platforms that will not boot with unbuffered or non-ECC DIMMs.
Running at 1.35 V lowers power draw and heat output compared with standard 1.5 V DDR3, helping system fans run quieter under typical server workloads. The 157.5 mil thickness fits standard DIMM slots without clearance issues.
| Brand | Axiom |
|---|---|
| Model | 7104199-AX |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 152 × 76 × 25 mm |
The module provides 16 GB of DDR3 capacity with error-correcting code and a register that reduces electrical load on the memory controller, allowing higher-density configurations in compatible servers.
The DDR3 1600 speed rating sets the maximum data transfer rate at 1600 MT/s; actual throughput depends on the memory controller, channel population and BIOS settings of the host system.
It requires a standard 240-pin DDR3 DIMM socket and fits within a 157.5 mil board thickness, so it will seat in any server board designed for registered DDR3 DIMMs of that height.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?