NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Axiom
16GB DDR3 1600 ECC registered DIMM running at 1.35V for server stability
This Axiom 7104199-AX module provides 16 GB of DDR3 SDRAM built for servers and workstations that require registered ECC memory. It operates at 1600 MHz with a 1.35 V supply and uses the standard 240-pin DIMM form factor.
The module implements registered signal processing combined with error-correcting code to reduce electrical load on the memory controller and detect single-bit errors. This configuration is mandatory for platforms that will not boot with unbuffered or non-ECC DIMMs.
Running at 1.35 V lowers power draw and heat output compared with standard 1.5 V DDR3, helping system fans run quieter under typical server workloads. The 157.5 mil thickness fits standard DIMM slots without clearance issues.
| Brand | Axiom |
|---|---|
| Model | 7104199-AX |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Verzendgewicht | 0.09 kg |
| Pakketafmetingen | 152 × 76 × 25 mm |
The module provides 16 GB of DDR3 capacity with error-correcting code and a register that reduces electrical load on the memory controller, allowing higher-density configurations in compatible servers.
The DDR3 1600 speed rating sets the maximum data transfer rate at 1600 MT/s; actual throughput depends on the memory controller, channel population and BIOS settings of the host system.
It requires a standard 240-pin DDR3 DIMM socket and fits within a 157.5 mil board thickness, so it will seat in any server board designed for registered DDR3 DIMMs of that height.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?