NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Axiom
16GB DDR3 1600 ECC registered DIMM running at 1.35V for server stability
This Axiom 7104199-AX module provides 16 GB of DDR3 SDRAM built for servers and workstations that require registered ECC memory. It operates at 1600 MHz with a 1.35 V supply and uses the standard 240-pin DIMM form factor.
The module implements registered signal processing combined with error-correcting code to reduce electrical load on the memory controller and detect single-bit errors. This configuration is mandatory for platforms that will not boot with unbuffered or non-ECC DIMMs.
Running at 1.35 V lowers power draw and heat output compared with standard 1.5 V DDR3, helping system fans run quieter under typical server workloads. The 157.5 mil thickness fits standard DIMM slots without clearance issues.
| Brand | Axiom |
|---|---|
| Model | 7104199-AX |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Peso di spedizione | 0.09 kg |
| Dimensioni del pacco | 152 × 76 × 25 mm |
The module provides 16 GB of DDR3 capacity with error-correcting code and a register that reduces electrical load on the memory controller, allowing higher-density configurations in compatible servers.
The DDR3 1600 speed rating sets the maximum data transfer rate at 1600 MT/s; actual throughput depends on the memory controller, channel population and BIOS settings of the host system.
It requires a standard 240-pin DDR3 DIMM socket and fits within a 157.5 mil board thickness, so it will seat in any server board designed for registered DDR3 DIMMs of that height.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?