Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black low-profile DDR4 modules with anodized aluminum heat spreaders

Corsair

Corsair CMK32GX4M2E3200C16 Vengeance LPX 32GB (2×16GB) DDR4 3200 desktop RAM

SKU CH-10XQ-77YQZ MPN CMK32GX4M2E3200C16

32 GB DDR4 desktop memory kit running at 3200 MT/s with CL16 timings and a low-profile aluminum heatspreader

  • 32 GB dual-channel kit gives ample capacity for multitasking
  • 3200 MHz DDR4 speed delivers high bandwidth for demanding workloads
  • CAS 16 timing with 16-20-20-38 latency ensures responsive performance
  • 35 V operation reduces power draw and heat output
  • Anodized aluminium heatspreader and eight-layer PCB improve thermal headroom

Vengeance LPX 32 GB DDR4 kit

This Corsair Vengeance LPX kit delivers 32 GB of DDR4 memory in a matched 2 x 16 GB configuration rated for 3200 MT/s. It targets enthusiasts and builders who want reliable high-frequency performance for gaming or content creation without fitting tall heatspreaders.

Thermals and power at 1.35 V

Each module uses a pure aluminum heatspreader and an eight-layer PCB to move heat away from the ICs during sustained loads. The low-profile height keeps airflow clear around large CPU coolers, and the 1.35 V operating voltage limits power draw while maintaining the rated 16-20-20-38 timings.

Build quality and daily fit

Individually screened ICs and Intel XMP 2.0 profiles give straightforward one-click setup on tested Intel 100, 300, 400, 500 Series and X299 platforms, plus AMD 300, 400, 500 Series and X570 boards. The 288-pin DIMMs suit standard desktop slots, but buyers needing four-module populations or ECC support should look elsewhere.

Kohokohdat

  • 32 GB dual-channel kit gives ample capacity for multitasking
  • 3200 MHz DDR4 speed delivers high bandwidth for demanding workloads
  • CAS 16 timing with 16-20-20-38 latency ensures responsive performance
  • 35 V operation reduces power draw and heat output
  • Anodized aluminium heatspreader and eight-layer PCB improve thermal headroom

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR4 modules and enable the XMP 2.0 profile without skipping the BIOS step?

Align the notch on each 288-pin stick with the slot key, press firmly until the retention clips click, then enter the motherboard BIOS and enable the Intel XMP 2.0 profile so the kit runs at its rated 3200 speed instead of the default JEDEC frequency.

What maintenance will the anodized aluminum heatspreader and eight-layer PCB need over time?

The heatspreader and PCB are passive components with no moving parts; occasional dust removal with compressed air is the only upkeep required, and no thermal-pad replacement or re-torquing is specified for this kit.

At what point does the 1.35 V limit become the bottleneck during sustained heavy workloads?

The modules are rated to operate at 1.35 V; pushing voltage beyond that spec risks instability and can trigger the motherboard's protection circuits, so the voltage ceiling is the first hard limit encountered when scaling frequency or tightening timings beyond the XMP 2.0 profile.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.