暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black low-profile DDR4 modules with anodized aluminum heat spreaders

Corsair

Corsair CMK32GX4M2E3200C16 Vengeance LPX 32GB (2×16GB) DDR4 3200 desktop RAM

SKU CH-10XQ-77YQZ MPN CMK32GX4M2E3200C16

32 GB DDR4 desktop memory kit running at 3200 MT/s with CL16 timings and a low-profile aluminum heatspreader

  • 32 GB dual-channel kit gives ample capacity for multitasking
  • 3200 MHz DDR4 speed delivers high bandwidth for demanding workloads
  • CAS 16 timing with 16-20-20-38 latency ensures responsive performance
  • 35 V operation reduces power draw and heat output
  • Anodized aluminium heatspreader and eight-layer PCB improve thermal headroom

Vengeance LPX 32 GB DDR4 kit

This Corsair Vengeance LPX kit delivers 32 GB of DDR4 memory in a matched 2 x 16 GB configuration rated for 3200 MT/s. It targets enthusiasts and builders who want reliable high-frequency performance for gaming or content creation without fitting tall heatspreaders.

Thermals and power at 1.35 V

Each module uses a pure aluminum heatspreader and an eight-layer PCB to move heat away from the ICs during sustained loads. The low-profile height keeps airflow clear around large CPU coolers, and the 1.35 V operating voltage limits power draw while maintaining the rated 16-20-20-38 timings.

Build quality and daily fit

Individually screened ICs and Intel XMP 2.0 profiles give straightforward one-click setup on tested Intel 100, 300, 400, 500 Series and X299 platforms, plus AMD 300, 400, 500 Series and X570 boards. The 288-pin DIMMs suit standard desktop slots, but buyers needing four-module populations or ECC support should look elsewhere.

特長

  • 32 GB dual-channel kit gives ample capacity for multitasking
  • 3200 MHz DDR4 speed delivers high bandwidth for demanding workloads
  • CAS 16 timing with 16-20-20-38 latency ensures responsive performance
  • 35 V operation reduces power draw and heat output
  • Anodized aluminium heatspreader and eight-layer PCB improve thermal headroom

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the 288-pin DDR4 modules and enable the XMP 2.0 profile without skipping the BIOS step?

Align the notch on each 288-pin stick with the slot key, press firmly until the retention clips click, then enter the motherboard BIOS and enable the Intel XMP 2.0 profile so the kit runs at its rated 3200 speed instead of the default JEDEC frequency.

What maintenance will the anodized aluminum heatspreader and eight-layer PCB need over time?

The heatspreader and PCB are passive components with no moving parts; occasional dust removal with compressed air is the only upkeep required, and no thermal-pad replacement or re-torquing is specified for this kit.

At what point does the 1.35 V limit become the bottleneck during sustained heavy workloads?

The modules are rated to operate at 1.35 V; pushing voltage beyond that spec risks instability and can trigger the motherboard's protection circuits, so the voltage ceiling is the first hard limit encountered when scaling frequency or tightening timings beyond the XMP 2.0 profile.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。