Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 400-AIWQ 1.8TB 2.5" SAS 12Gb/s 10000 RPM Non Hot-Swap internal hard drive

SKU CH-80PM-EZ1DN

Stores 1.8TB on a 2.5" SAS drive spinning at 10000 RPM with a 12Gb/s interface

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 8 TB capacity stores large datasets on a 2.5 inch form factor
  • 10000 RPM spindle speed delivers fast data access for transactional workloads
  • SAS 12Gb/s interface provides high-throughput connectivity to compatible controllers
  • Non hot-swap tray design suits fixed internal drive bays in Dell systems
  • Dell original part 400-AIWQ ensures validated compatibility with supported platforms

Dell 400-AIWQ 1.8TB SAS Drive

This Dell 400-AIWQ is a 1.8TB internal hard drive built for desktop chassis. It uses a 2.5 inch form factor and connects through a SAS 12Gb/s interface. The spindle spins at 10000 RPM to serve workloads that need consistent throughput.

Suits SAS bays without hot-swap

The drive fits systems that accept a 2.5 inch SAS device and do not require hot-swap trays. It is not for builds that need hot-swap carriers or capacities beyond 1.8TB. Buyers who want silent solid-state operation should look elsewhere.

SAS 12Gb/s interface decides fit

The single specification that determines compatibility is the SAS 12Gb/s interface. Your controller or backplane must support this signalling standard. Without it the drive will not communicate with the host system.

Kohokohdat

  • 8 TB capacity stores large datasets on a 2.5 inch form factor
  • 10000 RPM spindle speed delivers fast data access for transactional workloads
  • SAS 12Gb/s interface provides high-throughput connectivity to compatible controllers
  • Non hot-swap tray design suits fixed internal drive bays in Dell systems
  • Dell original part 400-AIWQ ensures validated compatibility with supported platforms

Tekniset tiedot

BrandDell
Model400-AIWQ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

How can I verify the 1.8TB SAS drive is running at 10000 RPM after installation?

Check the drive model 400-AIWQ in your RAID controller BIOS or Dell OpenManage; the reported rotational speed should read 10000 RPM and the link speed should show SAS 12Gb/s.

What comes in the box with the 400-AIWQ and what must I source separately?

The bare 2.5" drive ships alone; you will need a compatible SAS cable, a 2.5" drive bay or caddy, and a RAID or HBA card that supports SAS 12Gb/s.

Which version of the 400-AIWQ should I choose for a non hot-swap 12Gb/s SAS bay?

This single 1.8TB 10K model is the only 400-AIWQ variant; it matches a non hot-swap 2.5" bay running SAS 12Gb/s.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.