We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare 2.5 inch SAS hard drive silver aluminium casing circuit board visible

DELL

DELL 400-AIWQ 1.8TB 2.5" SAS 12Gb/s 10000 RPM Non Hot-Swap internal hard drive

SKU CH-80PM-EZ1DN

Stores 1.8TB on a 2.5" SAS drive spinning at 10000 RPM with a 12Gb/s interface

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 8 TB capacity stores large datasets on a 2.5 inch form factor
  • 10000 RPM spindle speed delivers fast data access for transactional workloads
  • SAS 12Gb/s interface provides high-throughput connectivity to compatible controllers
  • Non hot-swap tray design suits fixed internal drive bays in Dell systems
  • Dell original part 400-AIWQ ensures validated compatibility with supported platforms

Dell 400-AIWQ 1.8TB SAS Drive

This Dell 400-AIWQ is a 1.8TB internal hard drive built for desktop chassis. It uses a 2.5 inch form factor and connects through a SAS 12Gb/s interface. The spindle spins at 10000 RPM to serve workloads that need consistent throughput.

Suits SAS bays without hot-swap

The drive fits systems that accept a 2.5 inch SAS device and do not require hot-swap trays. It is not for builds that need hot-swap carriers or capacities beyond 1.8TB. Buyers who want silent solid-state operation should look elsewhere.

SAS 12Gb/s interface decides fit

The single specification that determines compatibility is the SAS 12Gb/s interface. Your controller or backplane must support this signalling standard. Without it the drive will not communicate with the host system.

Highlights

  • 8 TB capacity stores large datasets on a 2.5 inch form factor
  • 10000 RPM spindle speed delivers fast data access for transactional workloads
  • SAS 12Gb/s interface provides high-throughput connectivity to compatible controllers
  • Non hot-swap tray design suits fixed internal drive bays in Dell systems
  • Dell original part 400-AIWQ ensures validated compatibility with supported platforms

Specifications

BrandDell
Model400-AIWQ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Questions about this item

How can I verify the 1.8TB SAS drive is running at 10000 RPM after installation?

Check the drive model 400-AIWQ in your RAID controller BIOS or Dell OpenManage; the reported rotational speed should read 10000 RPM and the link speed should show SAS 12Gb/s.

What comes in the box with the 400-AIWQ and what must I source separately?

The bare 2.5" drive ships alone; you will need a compatible SAS cable, a 2.5" drive bay or caddy, and a RAID or HBA card that supports SAS 12Gb/s.

Which version of the 400-AIWQ should I choose for a non hot-swap 12Gb/s SAS bay?

This single 1.8TB 10K model is the only 400-AIWQ variant; it matches a non hot-swap 2.5" bay running SAS 12Gb/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.