Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL 400-ANEU 8TB 3.5" SATA 7.2K 6Gb/s internal hard drive

SKU CH-RC54-5T09T

Stores 8 TB of data on a 3.5-inch SATA drive spinning at 7.2K RPM with a 6 Gb/s interface and hot-swap support

  • InterfaceSAS 12Gb/s
  • Capacity600GB
  • RPM10000 RPM
  • Form Factor2.5"
  • 8 TB capacity for large-scale storage
  • 2 K RPM spindle for steady throughput
  • SATA 6 Gb/s interface for broad compatibility
  • 5 inch form factor fits standard bays
  • Hot-swap tray enables drive changes without shutdown

Dell 8TB 3.5" SATA Drive

This Dell 400-ANEU is an 8TB 3.5" SATA hard drive spinning at 7.2K RPM with a 6Gb/s interface. It suits desktop workstations and entry servers that need high-capacity bulk storage for archives, backups or media libraries. The drive is new and ships in original or OEM packaging. Buyers who need faster random access or a 2.5" form factor should look elsewhere.

Installation and Compatibility

The 3.5" SATA form factor fits standard desktop drive bays and backplanes using common data and power cables. Hot-swap support allows replacement without powering down compatible chassis. Ensure the host controller or backplane provides a 6Gb/s SATA link; older 3Gb/s ports will work but limit throughput. This drive uses SATA, not SAS, so it will not function in SAS-only bays.

Deciding Specification

The 8TB capacity at 7.2K RPM over a SATA 6Gb/s interface is the single figure that determines suitability. It delivers maximum sequential throughput for large-file workloads while keeping cost per terabyte low. If the workload demands 10K or 12Gb/s SAS performance, this drive does not meet that requirement.

Kohokohdat

  • 8 TB capacity for large-scale storage
  • 2 K RPM spindle for steady throughput
  • SATA 6 Gb/s interface for broad compatibility
  • 5 inch form factor fits standard bays
  • Hot-swap tray enables drive changes without shutdown

Tekniset tiedot

BrandDell
Model400-AKKZ
InterfaceSAS 12Gb/s
Capacity600GB
RPM10000 RPM
Form Factor2.5"

Kysymyksiä tästä tuotteesta

How can I verify the 8 TB SATA drive is spinning at 7.2 K RPM after installation?

Listen for the characteristic 3.5-inch mechanical hum and check the BIOS or operating-system disk utility to confirm the reported rotation speed of 7.2 K RPM.

What ships with the 400-ANEU drive and what must I source separately?

The drive itself ships in retail or OEM packaging; a SATA data cable, SATA power lead and any 3.5-inch mounting tray or hot-swap caddy are not included.

Should I choose the 8 TB 3.5-inch SATA model or the 600 GB 2.5-inch SAS 10 K version for my array?

Pick the 8 TB 3.5-inch SATA 6 Gb/s drive for high-capacity bulk storage; choose the 600 GB 2.5-inch SAS 12 Gb/s 10 K RPM unit when you need faster random access in a hot-swap bay.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.