DELL
DELL 400-ANEU 8TB 3.5" SATA 7.2K 6Gb/s internal hard drive
Stores 8 TB of data on a 3.5-inch SATA drive spinning at 7.2K RPM with a 6 Gb/s interface and hot-swap support
- InterfaceSAS 12Gb/s
- Capacity600GB
- RPM10000 RPM
- Form Factor2.5"
- 8 TB capacity for large-scale storage
- 2 K RPM spindle for steady throughput
- SATA 6 Gb/s interface for broad compatibility
- 5 inch form factor fits standard bays
- Hot-swap tray enables drive changes without shutdown
Dell 8TB 3.5" SATA Drive
This Dell 400-ANEU is an 8TB 3.5" SATA hard drive spinning at 7.2K RPM with a 6Gb/s interface. It suits desktop workstations and entry servers that need high-capacity bulk storage for archives, backups or media libraries. The drive is new and ships in original or OEM packaging. Buyers who need faster random access or a 2.5" form factor should look elsewhere.
Installation and Compatibility
The 3.5" SATA form factor fits standard desktop drive bays and backplanes using common data and power cables. Hot-swap support allows replacement without powering down compatible chassis. Ensure the host controller or backplane provides a 6Gb/s SATA link; older 3Gb/s ports will work but limit throughput. This drive uses SATA, not SAS, so it will not function in SAS-only bays.
Deciding Specification
The 8TB capacity at 7.2K RPM over a SATA 6Gb/s interface is the single figure that determines suitability. It delivers maximum sequential throughput for large-file workloads while keeping cost per terabyte low. If the workload demands 10K or 12Gb/s SAS performance, this drive does not meet that requirement.
Přednosti
- 8 TB capacity for large-scale storage
- 2 K RPM spindle for steady throughput
- SATA 6 Gb/s interface for broad compatibility
- 5 inch form factor fits standard bays
- Hot-swap tray enables drive changes without shutdown
Specifikace
| Brand | Dell |
|---|---|
| Model | 400-AKKZ |
| Interface | SAS 12Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Otázky k tomuto produktu
How can I verify the 8 TB SATA drive is spinning at 7.2 K RPM after installation?
Listen for the characteristic 3.5-inch mechanical hum and check the BIOS or operating-system disk utility to confirm the reported rotation speed of 7.2 K RPM.
What ships with the 400-ANEU drive and what must I source separately?
The drive itself ships in retail or OEM packaging; a SATA data cable, SATA power lead and any 3.5-inch mounting tray or hot-swap caddy are not included.
Should I choose the 8 TB 3.5-inch SATA model or the 600 GB 2.5-inch SAS 10 K version for my array?
Pick the 8 TB 3.5-inch SATA 6 Gb/s drive for high-capacity bulk storage; choose the 600 GB 2.5-inch SAS 12 Gb/s 10 K RPM unit when you need faster random access in a hot-swap bay.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
