We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL 400-ANEU 8TB 3.5" SATA 7.2K 6Gb/s internal hard drive

SKU CH-RC54-5T09T

Stores 8 TB of data on a 3.5-inch SATA drive spinning at 7.2K RPM with a 6 Gb/s interface and hot-swap support

  • InterfaceSAS 12Gb/s
  • Capacity600GB
  • RPM10000 RPM
  • Form Factor2.5"
  • 8 TB capacity for large-scale storage
  • 2 K RPM spindle for steady throughput
  • SATA 6 Gb/s interface for broad compatibility
  • 5 inch form factor fits standard bays
  • Hot-swap tray enables drive changes without shutdown

Dell 8TB 3.5" SATA Drive

This Dell 400-ANEU is an 8TB 3.5" SATA hard drive spinning at 7.2K RPM with a 6Gb/s interface. It suits desktop workstations and entry servers that need high-capacity bulk storage for archives, backups or media libraries. The drive is new and ships in original or OEM packaging. Buyers who need faster random access or a 2.5" form factor should look elsewhere.

Installation and Compatibility

The 3.5" SATA form factor fits standard desktop drive bays and backplanes using common data and power cables. Hot-swap support allows replacement without powering down compatible chassis. Ensure the host controller or backplane provides a 6Gb/s SATA link; older 3Gb/s ports will work but limit throughput. This drive uses SATA, not SAS, so it will not function in SAS-only bays.

Deciding Specification

The 8TB capacity at 7.2K RPM over a SATA 6Gb/s interface is the single figure that determines suitability. It delivers maximum sequential throughput for large-file workloads while keeping cost per terabyte low. If the workload demands 10K or 12Gb/s SAS performance, this drive does not meet that requirement.

Highlights

  • 8 TB capacity for large-scale storage
  • 2 K RPM spindle for steady throughput
  • SATA 6 Gb/s interface for broad compatibility
  • 5 inch form factor fits standard bays
  • Hot-swap tray enables drive changes without shutdown

Specifications

BrandDell
Model400-AKKZ
InterfaceSAS 12Gb/s
Capacity600GB
RPM10000 RPM
Form Factor2.5"

Questions about this item

How can I verify the 8 TB SATA drive is spinning at 7.2 K RPM after installation?

Listen for the characteristic 3.5-inch mechanical hum and check the BIOS or operating-system disk utility to confirm the reported rotation speed of 7.2 K RPM.

What ships with the 400-ANEU drive and what must I source separately?

The drive itself ships in retail or OEM packaging; a SATA data cable, SATA power lead and any 3.5-inch mounting tray or hot-swap caddy are not included.

Should I choose the 8 TB 3.5-inch SATA model or the 600 GB 2.5-inch SAS 10 K version for my array?

Pick the 8 TB 3.5-inch SATA 6 Gb/s drive for high-capacity bulk storage; choose the 600 GB 2.5-inch SAS 12 Gb/s 10 K RPM unit when you need faster random access in a hot-swap bay.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.