Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-ANTX 10TB 3.5" SAS 12Gb/s 7.2K internal hard drive

SKU CH-RY3Z-N7Q22

A 10 TB 3.5 inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers fast transfer rates
  • 2 K RPM spindle provides steady throughput
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables quick drive replacement

10 TB Nearline SAS Drive

This 10 TB nearline SAS drive is built for servers and storage arrays that need high-capacity bulk storage. It suits administrators who want a single 3.5-inch drive for archiving, backup targets or secondary data volumes.

Hot-Swap Tray Installation

The drive ships as a bare mechanism with a hot-swap tray, so it slides into a compatible SAS backplane without tools or cabling. Installation fails when the chassis lacks 12 Gb/s SAS ports or when the backplane does not accept 3.5-inch hot-swap carriers.

12 Gb/s SAS Interface Limits

The 12 Gb/s SAS link delivers up to 12 Gb/s per port, but sustained throughput is bounded by the 7.2 K rotational speed and the mechanical latency of a 10 TB platter stack. Workloads that demand low-latency random I/O or saturation of multiple lanes will hit the drive’s physical ceiling.

Kohokohdat

  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers fast transfer rates
  • 2 K RPM spindle provides steady throughput
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables quick drive replacement

Tekniset tiedot

BrandDell
Model400-AKWR
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Form Factor3.5"

Kysymyksiä tästä tuotteesta

How can I verify the 10TB SAS drive is recognised and spinning at 7200 RPM after installation?

Check the BIOS or RAID controller for a 10TB SAS device at 12Gb/s and confirm the reported speed shows 7200 RPM.

The listing says bare drive packaging — does the box include a hot-swap tray or mounting screws, or must I buy them separately?

Only the bare drive is supplied; the hot-swap tray and any mounting screws are not included and must be sourced separately.

The specifications show both 8TB and 10TB capacities — which one matches part number 400-ANTX?

Part number 400-ANTX corresponds to the 10TB capacity; the 8TB figure belongs to a different model.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.