Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030606BTC
In stock
DELL
DELL 400-ANTX 10TB 3.5" SAS 12Gb/s 7.2K internal hard drive
A 10 TB 3.5 inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Form Factor3.5"
- 10 TB capacity stores large data sets
- SAS 12 Gb/s interface delivers fast transfer rates
- 2 K RPM spindle provides steady throughput
- 5 inch form factor fits standard drive bays
- Hot-swap tray enables quick drive replacement
10 TB Nearline SAS Drive
This 10 TB nearline SAS drive is built for servers and storage arrays that need high-capacity bulk storage. It suits administrators who want a single 3.5-inch drive for archiving, backup targets or secondary data volumes.
Hot-Swap Tray Installation
The drive ships as a bare mechanism with a hot-swap tray, so it slides into a compatible SAS backplane without tools or cabling. Installation fails when the chassis lacks 12 Gb/s SAS ports or when the backplane does not accept 3.5-inch hot-swap carriers.
12 Gb/s SAS Interface Limits
The 12 Gb/s SAS link delivers up to 12 Gb/s per port, but sustained throughput is bounded by the 7.2 K rotational speed and the mechanical latency of a 10 TB platter stack. Workloads that demand low-latency random I/O or saturation of multiple lanes will hit the drive’s physical ceiling.
Highlights
- 10 TB capacity stores large data sets
- SAS 12 Gb/s interface delivers fast transfer rates
- 2 K RPM spindle provides steady throughput
- 5 inch form factor fits standard drive bays
- Hot-swap tray enables quick drive replacement
Specifications
| Brand | Dell |
|---|---|
| Model | 400-AKWR |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Questions about this item
How can I verify the 10TB SAS drive is recognised and spinning at 7200 RPM after installation?
Check the BIOS or RAID controller for a 10TB SAS device at 12Gb/s and confirm the reported speed shows 7200 RPM.
The listing says bare drive packaging — does the box include a hot-swap tray or mounting screws, or must I buy them separately?
Only the bare drive is supplied; the hot-swap tray and any mounting screws are not included and must be sourced separately.
The specifications show both 8TB and 10TB capacities — which one matches part number 400-ANTX?
Part number 400-ANTX corresponds to the 10TB capacity; the 8TB figure belongs to a different model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
