Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-ANTX 10TB 3.5" SAS 12Gb/s 7.2K internal hard drive

SKU CH-RY3Z-N7Q22

A 10 TB 3.5 inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers fast transfer rates
  • 2 K RPM spindle provides steady throughput
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables quick drive replacement

10 TB Nearline SAS Drive

This 10 TB nearline SAS drive is built for servers and storage arrays that need high-capacity bulk storage. It suits administrators who want a single 3.5-inch drive for archiving, backup targets or secondary data volumes.

Hot-Swap Tray Installation

The drive ships as a bare mechanism with a hot-swap tray, so it slides into a compatible SAS backplane without tools or cabling. Installation fails when the chassis lacks 12 Gb/s SAS ports or when the backplane does not accept 3.5-inch hot-swap carriers.

12 Gb/s SAS Interface Limits

The 12 Gb/s SAS link delivers up to 12 Gb/s per port, but sustained throughput is bounded by the 7.2 K rotational speed and the mechanical latency of a 10 TB platter stack. Workloads that demand low-latency random I/O or saturation of multiple lanes will hit the drive’s physical ceiling.

Puncte forte

  • 10 TB capacity stores large data sets
  • SAS 12 Gb/s interface delivers fast transfer rates
  • 2 K RPM spindle provides steady throughput
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables quick drive replacement

Specificații

BrandDell
Model400-AKWR
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Form Factor3.5"

Întrebări despre acest articol

How can I verify the 10TB SAS drive is recognised and spinning at 7200 RPM after installation?

Check the BIOS or RAID controller for a 10TB SAS device at 12Gb/s and confirm the reported speed shows 7200 RPM.

The listing says bare drive packaging — does the box include a hot-swap tray or mounting screws, or must I buy them separately?

Only the bare drive is supplied; the hot-swap tray and any mounting screws are not included and must be sourced separately.

The specifications show both 8TB and 10TB capacities — which one matches part number 400-ANTX?

Part number 400-ANTX corresponds to the 10TB capacity; the 8TB figure belongs to a different model.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.