Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A silver 3.5 inch bare SAS hard drive with exposed circuit board and label showing 10TB 7200 RPM

DELL

DELL 400-AUUN 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-0F6Y-1A73Z

A 10 TB 3.5-inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s interface for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for high-throughput connectivity
  • 7200 RPM spindle speed for responsive nearline performance
  • 5 inch form factor fits standard drive bays
  • Dell part 400-AUUN ensures system compatibility

Dell 400-AUUN 10TB SAS Hard Drive

This Dell 400-AUUN is a 10TB 3.5-inch internal hard drive built for desktop systems. It uses a SAS 12Gb/s interface and spins at 7200 RPM. The drive arrives as a bare unit without a mounting tray. It is suited for storage expansion in compatible workstations or servers.

Buyers who need a 12Gb/s SAS connection

This drive suits builders who need a 12Gb/s SAS connection and a 7200 RPM spindle speed. It is not for systems that only accept a different physical interface or a smaller form factor. Buyers who require a drive with an included mounting tray should look elsewhere.

SAS 12Gb/s interface

The single specification that decides compatibility is the SAS 12Gb/s interface. The host controller or backplane must support this exact interface for the drive to function. Verify that your system provides a SAS 12Gb/s connection before purchase.

Kohokohdat

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for high-throughput connectivity
  • 7200 RPM spindle speed for responsive nearline performance
  • 5 inch form factor fits standard drive bays
  • Dell part 400-AUUN ensures system compatibility

Tekniset tiedot

BrandDell
Model400-AUUN
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Form Factor3.5"

Kysymyksiä tästä tuotteesta

How do I install the 3.5" SAS drive and what step is often missed?

Mount the bare 3.5" drive in a compatible bay, connect the SAS 12Gb/s data and power cables, then ensure the backplane or controller is set to 12 Gb/s mode; many builders leave it at 6 Gb/s by default.

What maintenance or replacement will the 10TB Nearline SAS drive need later?

As a mechanical 7200 RPM HDD it has no user-serviceable parts; plan to replace the entire 400-AUUN unit once SMART attributes report reallocated sectors or after the rated workload limit is reached.

What limit appears first on the 400-AUUN under sustained 12Gb/s writes?

The 7.2K spindle caps sustained throughput well below the 12 Gb/s interface ceiling, so sequential write speed hits the mechanical ceiling before the SAS link saturates.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.