暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A silver 3.5 inch bare SAS hard drive with exposed circuit board and label showing 10TB 7200 RPM

DELL

DELL 400-AUUN 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-0F6Y-1A73Z

A 10 TB 3.5-inch SAS hard drive spinning at 7200 RPM with a 12 Gb/s interface for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for high-throughput connectivity
  • 7200 RPM spindle speed for responsive nearline performance
  • 5 inch form factor fits standard drive bays
  • Dell part 400-AUUN ensures system compatibility

Dell 400-AUUN 10TB SAS Hard Drive

This Dell 400-AUUN is a 10TB 3.5-inch internal hard drive built for desktop systems. It uses a SAS 12Gb/s interface and spins at 7200 RPM. The drive arrives as a bare unit without a mounting tray. It is suited for storage expansion in compatible workstations or servers.

Buyers who need a 12Gb/s SAS connection

This drive suits builders who need a 12Gb/s SAS connection and a 7200 RPM spindle speed. It is not for systems that only accept a different physical interface or a smaller form factor. Buyers who require a drive with an included mounting tray should look elsewhere.

SAS 12Gb/s interface

The single specification that decides compatibility is the SAS 12Gb/s interface. The host controller or backplane must support this exact interface for the drive to function. Verify that your system provides a SAS 12Gb/s connection before purchase.

特長

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for high-throughput connectivity
  • 7200 RPM spindle speed for responsive nearline performance
  • 5 inch form factor fits standard drive bays
  • Dell part 400-AUUN ensures system compatibility

仕様

BrandDell
Model400-AUUN
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

How do I install the 3.5" SAS drive and what step is often missed?

Mount the bare 3.5" drive in a compatible bay, connect the SAS 12Gb/s data and power cables, then ensure the backplane or controller is set to 12 Gb/s mode; many builders leave it at 6 Gb/s by default.

What maintenance or replacement will the 10TB Nearline SAS drive need later?

As a mechanical 7200 RPM HDD it has no user-serviceable parts; plan to replace the entire 400-AUUN unit once SMART attributes report reallocated sectors or after the rated workload limit is reached.

What limit appears first on the 400-AUUN under sustained 12Gb/s writes?

The 7.2K spindle caps sustained throughput well below the 12 Gb/s interface ceiling, so sequential write speed hits the mechanical ceiling before the SAS link saturates.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。