Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive in Dell server mounting tray

DELL

DELL WR711 146GB 10000RPM 3.5" SAS 3Gb/s internal hard drive

SKU CH-J800-XFT8V

A 146GB 3.5-inch SAS drive spinning at 10000 RPM for Dell PowerEdge servers

  • InterfaceSAS 3Gb/s
  • Capacity146GB
  • RPM10000 RPM
  • Form Factor3.5"
  • 10000 RPM spindle delivers fast data access for transactional workloads
  • SAS 3Gb/s interface provides reliable connectivity to PowerEdge RAID controllers
  • 146 GB capacity fits operating system and application volumes
  • 5 inch form factor with included tray installs directly into supported server bays
  • Compatible with PowerEdge 1900, 1950 III, 2900 III, 2950 III, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440.

Dell WR711 146GB SAS Drive

The Dell WR711 is a 3.5-inch internal hard drive with a 146GB capacity and a 10000 RPM spindle speed. It uses a SAS 3Gb/s interface and ships with a tray for direct installation. This drive is built for Dell PowerEdge server environments.

Suits PowerEdge Servers Listed

This drive fits Dell PowerEdge models including the 1900, 1950 III, 2900 III, 2950 III, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440, T100, T105 and T300. Builders needing larger capacities, different form factors or interfaces not listed here should consider other options.

SAS 3Gb/s Interface Decides Fit

The single specification that determines compatibility is the SAS 3Gb/s interface. Your backplane or controller must support this exact standard for the drive to function. Verify the server documentation matches this interface before purchase.

Kohokohdat

  • 10000 RPM spindle delivers fast data access for transactional workloads
  • SAS 3Gb/s interface provides reliable connectivity to PowerEdge RAID controllers
  • 146 GB capacity fits operating system and application volumes
  • 5 inch form factor with included tray installs directly into supported server bays
  • Compatible with PowerEdge 1900, 1950 III, 2900 III, 2950 III, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440.

Tekniset tiedot

InterfaceSAS 3Gb/s
Capacity146GB
RPM10000 RPM
Form Factor3.5"

Kysymyksiä tästä tuotteesta

What throughput does the SAS 3Gb/s interface cap at in practice?

The SAS 3Gb/s link tops out around 300 MB/s, so sustained reads and writes from the 10000 RPM platters will not exceed that ceiling.

What physical space and mounting does the 3.5" drive with tray require?

It fits a standard 3.5-inch drive bay and ships with the Dell tray that locks into PowerEdge hot-swap cages such as the 1950 III, 2950 III and R900.

How is the drive installed in a PowerEdge server and what step is often missed?

Slide the tray into the hot-swap bay until the latch clicks, then verify the controller BIOS sees the 146GB volume before initializing the array.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.