Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 3.5 inch SAS hard drive in Dell server mounting tray

DELL

DELL WR711 146GB 10000RPM 3.5" SAS 3Gb/s internal hard drive

SKU CH-J800-XFT8V

A 146GB 3.5-inch SAS drive spinning at 10000 RPM for Dell PowerEdge servers

  • InterfaceSAS 3Gb/s
  • Capacity146GB
  • RPM10000 RPM
  • Form Factor3.5"
  • 10000 RPM spindle delivers fast data access for transactional workloads
  • SAS 3Gb/s interface provides reliable connectivity to PowerEdge RAID controllers
  • 146 GB capacity fits operating system and application volumes
  • 5 inch form factor with included tray installs directly into supported server bays
  • Compatible with PowerEdge 1900, 1950 III, 2900 III, 2950 III, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440.

Dell WR711 146GB SAS Drive

The Dell WR711 is a 3.5-inch internal hard drive with a 146GB capacity and a 10000 RPM spindle speed. It uses a SAS 3Gb/s interface and ships with a tray for direct installation. This drive is built for Dell PowerEdge server environments.

Suits PowerEdge Servers Listed

This drive fits Dell PowerEdge models including the 1900, 1950 III, 2900 III, 2950 III, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440, T100, T105 and T300. Builders needing larger capacities, different form factors or interfaces not listed here should consider other options.

SAS 3Gb/s Interface Decides Fit

The single specification that determines compatibility is the SAS 3Gb/s interface. Your backplane or controller must support this exact standard for the drive to function. Verify the server documentation matches this interface before purchase.

Prednosti

  • 10000 RPM spindle delivers fast data access for transactional workloads
  • SAS 3Gb/s interface provides reliable connectivity to PowerEdge RAID controllers
  • 146 GB capacity fits operating system and application volumes
  • 5 inch form factor with included tray installs directly into supported server bays
  • Compatible with PowerEdge 1900, 1950 III, 2900 III, 2950 III, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440.

Špecifikácie

InterfaceSAS 3Gb/s
Capacity146GB
RPM10000 RPM
Form Factor3.5"

Otázky k tomuto produktu

What throughput does the SAS 3Gb/s interface cap at in practice?

The SAS 3Gb/s link tops out around 300 MB/s, so sustained reads and writes from the 10000 RPM platters will not exceed that ceiling.

What physical space and mounting does the 3.5" drive with tray require?

It fits a standard 3.5-inch drive bay and ships with the Dell tray that locks into PowerEdge hot-swap cages such as the 1950 III, 2950 III and R900.

How is the drive installed in a PowerEdge server and what step is often missed?

Slide the tray into the hot-swap bay until the latch clicks, then verify the controller BIOS sees the 146GB volume before initializing the array.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.