Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Standard 3.5 inch internal hard drive with silver metal casing and circuit board visible

Epoch

Epoch 400-ATKW 98GV2 8TB 7200RPM SATA 3.5" internal hard drive

SKU CH-P7QS-54EMR

An 8 TB, 7200 RPM SATA desktop hard drive built for Dell PowerEdge 14 and 15 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle speed accelerates data access
  • SATA 6 Gb/s interface integrates with existing controllers
  • 5 inch form factor fits standard drive bays
  • Validated for Dell PowerEdge 14 and 15 generation servers

8 TB SATA server drive

This 8 TB 3.5-inch hard drive spins at 7200 RPM over a SATA 6 Gb/s interface. It is supplied as a replacement kit validated for Dell PowerEdge 14 and 15 generation rack and tower servers.

Suited for capacity-focused arrays

The drive targets administrators who need high-capacity bulk storage in compatible Dell servers. It is not intended for workloads that demand solid-state latency or for systems that lack a 3.5-inch SATA bay.

7200 RPM spindle speed decides fit

The 7200 RPM rotational speed delivers the throughput required for nearline server workloads. If your application needs faster random access or lower power draw, a different drive class will be required.

Kohokohdat

  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle speed accelerates data access
  • SATA 6 Gb/s interface integrates with existing controllers
  • 5 inch form factor fits standard drive bays
  • Validated for Dell PowerEdge 14 and 15 generation servers

Tekniset tiedot

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

Kysymyksiä tästä tuotteesta

How often should the 7200 RPM mechanical drive be replaced in a server running 24/7?

Enterprise drives at this speed are typically rated for five years of continuous operation; plan a proactive swap around that mark or when SMART attributes show reallocated sectors.

What limits sustained write throughput on the SATA 6Gb/s interface?

The 6 Gb/s link caps burst speed, but the 7200 RPM platters and internal media transfer rate set the real-world sustained ceiling during long sequential writes.

How much heat and noise does the 3.5" 8TB drive add to a fully populated chassis?

Expect typical idle power near 7 W and seek power around 10 W, raising chassis temperature modestly; acoustic output is comparable to other 7200 RPM enterprise drives.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.