Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Standard 3.5 inch internal hard drive with silver metal casing and circuit board visible

Epoch

Epoch 400-ATKW 98GV2 8TB 7200RPM SATA 3.5" internal hard drive

SKU CH-P7QS-54EMR

An 8 TB, 7200 RPM SATA desktop hard drive built for Dell PowerEdge 14 and 15 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle speed accelerates data access
  • SATA 6 Gb/s interface integrates with existing controllers
  • 5 inch form factor fits standard drive bays
  • Validated for Dell PowerEdge 14 and 15 generation servers

8 TB SATA server drive

This 8 TB 3.5-inch hard drive spins at 7200 RPM over a SATA 6 Gb/s interface. It is supplied as a replacement kit validated for Dell PowerEdge 14 and 15 generation rack and tower servers.

Suited for capacity-focused arrays

The drive targets administrators who need high-capacity bulk storage in compatible Dell servers. It is not intended for workloads that demand solid-state latency or for systems that lack a 3.5-inch SATA bay.

7200 RPM spindle speed decides fit

The 7200 RPM rotational speed delivers the throughput required for nearline server workloads. If your application needs faster random access or lower power draw, a different drive class will be required.

Pluspunten

  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle speed accelerates data access
  • SATA 6 Gb/s interface integrates with existing controllers
  • 5 inch form factor fits standard drive bays
  • Validated for Dell PowerEdge 14 and 15 generation servers

Specificaties

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

Vragen over dit artikel

How often should the 7200 RPM mechanical drive be replaced in a server running 24/7?

Enterprise drives at this speed are typically rated for five years of continuous operation; plan a proactive swap around that mark or when SMART attributes show reallocated sectors.

What limits sustained write throughput on the SATA 6Gb/s interface?

The 6 Gb/s link caps burst speed, but the 7200 RPM platters and internal media transfer rate set the real-world sustained ceiling during long sequential writes.

How much heat and noise does the 3.5" 8TB drive add to a fully populated chassis?

Expect typical idle power near 7 W and seek power around 10 W, raising chassis temperature modestly; acoustic output is comparable to other 7200 RPM enterprise drives.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.