Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone duplicator with 16 x 2 LCD and four M.2 NVMe slots

EZ Dupe, Inc.

EZ Dupe, Inc. NVMe Cyclone Pro 600 Duplicator 1-to-4 600MB/s

SKU CH-EXXG-4VMSE

Standalone duplicator copies one M.2 NVMe or SATA drive to four targets at 600 MB/s with eight erase modes and event-log download

  • TypeM.2 NVME Duplicator
  • Panel ColorBlack
  • Display16 x 2 LCD
  • ConnectorM.2 NVME / Hard Drive SATA
  • Target1 to 4
  • Buffer Memory128M

Target 1 to 4

Speed 600MB/Sec (36GB/Min)

Option M.2 NVME & SATA HDD

  • Copies up to 4 drives simultaneously at 600MB/s
  • Five copy modes including Whole Media and Non-zero options
  • Eight erase modes from Quick Erase to DoD 7-Pass
  • Real-time copy-and-compare verifies each section during duplication
  • Daisy-chains up to 255 units for large-scale deployment

Standalone NVMe Duplicator for Up to Four Targets

The EZ Dupe NVMe Cyclone Pro 600 duplicates M.2 NVMe and SATA SSDs to four targets simultaneously at up to 600 MB/s. It operates without a host PC using its Athena Controller and 128 MB buffer. The unit accepts B-Key, M-Key and B+M-Key modules plus 2.5" and 3.5" SATA drives up to 18 TB capacity.

AC-Powered Chassis with LCD Status Display

Power comes from an internal 115–230 V supply at 50/60 Hz. A 16 x 2 LCD panel and indication lights show progress and drive status during copy or erase jobs. The slot-load design keeps drives secure while the system runs unattended.

Five Copy Modes and Eight Erase Standards

Choose Whole Media, System and Files, All Partitions, Percentage or Non-zero copy for each task. Erase options include Quick, Full, DoD 3-Pass, DoD 7-Pass, Secure, Enhance, HPA and DCO area erase. Real-time copy-and-compare verifies each section, while event logs with time stamps and drive IDs download to the first destination slot. Daisy-chaining connects up to 255 identical units for larger deployments.

Kohokohdat

  • Copies up to 4 drives simultaneously at 600MB/s
  • Five copy modes including Whole Media and Non-zero options
  • Eight erase modes from Quick Erase to DoD 7-Pass
  • Real-time copy-and-compare verifies each section during duplication
  • Daisy-chains up to 255 units for large-scale deployment

Tekniset tiedot

BrandEZ Dupe
TypeM.2 NVME Duplicator
ModelNVME Cyclone Pro 600
Part NumberDM-HE6-5M04PP
Panel ColorBlack
Display16 x 2 LCD
ConnectorM.2 NVME / Hard Drive SATA
Target1 to 4
Buffer Memory128M
ControllerAthena Controller
Supported MediaM.2 NVME / SATA Hard Drive Disk / Solid State Drive
Data Transfer Rate600MB/s
Load TypeSlot
Key FeaturesSATA HDD Connection
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install a source drive and up to four target drives into the Cyclone Pro 600, and which step is often missed?

Insert the source NVMe or SATA drive into the designated source slot, then load up to four target drives into the remaining M.2 slots or SATA bays; the step often missed is confirming each target drive shows the correct capacity and key type on the 16 x 2 LCD before starting the copy job.

What maintenance or replacement will the duplicator need over time?

The unit has no user-serviceable parts; keep the ventilation slots clear of dust and verify the AC power inlet (115-230 V, 50/60 Hz) remains secure; if the Athena Controller or 128M buffer memory fails, the whole unit requires professional service.

What limit appears first during sustained high-speed duplication at 600MB/s?

Thermal throttling of the controller or target SSDs typically limits sustained throughput before the 600MB/s buffer ceiling is reached, especially when all four target slots are active continuously.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.