EZ Dupe, Inc. NVMe Cyclone Pro 300 1-to-4 M.2 NVMe Duplicator
- M.2 NVME Duplicator
- Black
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EZ Dupe, Inc.
Standalone duplicator copies one M.2 NVMe or SATA drive to nine targets at up to 600 MB/s with five copy modes, eight erase modes, real-time compare and daisy-chain expansion
Target 1 to 9
Speed 600MB/Sec (36GB/Min)
Option M.2 NVME & SATA HDD
The EZ Dupe NVMe Cyclone 600 copies one source drive to up to nine targets at 600 MB/s. It operates without a host PC and accepts M.2 NVMe and SATA modules as well as 2.5" and 3.5" SATA drives. The unit is built for IT teams and data centres that need fast, verified duplication.
Each copy job can handle drives beyond 18 TB using MBR or GPT partitioning. Five copy modes — Whole Media, System and Files, All Partitions, Percentage and Non-zero — let you match the workflow to the data set. The 128 MB buffer and Athena controller sustain the rated speed across all nine slots.
Up to 255 units can be linked for larger batch runs, reaching a combined 2,294 target capacity. The duplicator draws power from a standard 115–230 V, 50/60 Hz source. Indicator lights show slot status while real-time copy-and-compare and downloadable event logs verify every operation.
| Brand | EZ Dupe |
|---|---|
| Type | M.2 NVME Duplicator |
| Model | NVME Cyclone 600 |
| Part Number | DM-HE6-5M09PP |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | M.2 NVME / Hard Drive SATA |
| Target | 1 to 9 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | M.2 NVME / SATA Hard Drive Disk / Solid State Drive |
| Data Transfer Rate | 600MB/s |
| Load Type | Slot |
| Key Features | SATA Hard Drive connection |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the unit supports crossover duplication between SATA hard drives and M.2 NVMe SSDs using its built-in SATA connectors for 3.5" and 2.5" drives.
The quality-check function tests bad-sector count, actual capacity, average read speed and average write speed on each destination drive after the copy finishes.
The duplicator uses direct slot loading for M.2 modules and onboard SATA ports for 2.5" and 3.5" drives; no separate cables or adapters are mentioned.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?