نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

EZ Dupe, Inc.

EZ Dupe, Inc. NVMe Cyclone 600 1-to-9 Duplicator DM-HE6-5M09PP

SKU CH-Y6N6-DSVBC

Standalone duplicator copies one M.2 NVMe or SATA drive to nine targets at up to 600 MB/s with five copy modes, eight erase modes, real-time compare and daisy-chain expansion

  • TypeM.2 NVME Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorM.2 NVME / Hard Drive SATA
  • Target1 to 9
  • Buffer Memory128M

Target 1 to 9

Speed 600MB/Sec (36GB/Min)

Option M.2 NVME & SATA HDD

  • Copies up to 9 drives simultaneously at 600MB/s
  • Five NVMe copy modes including Whole Media and Percentage
  • Eight erase modes from Quick Erase to DoD 7-Pass
  • Real-time copy-and-compare verifies each section during duplication
  • Daisy-chain up to 255 units for massive parallel jobs

1-to-9 NVMe duplicator for standalone operation

The EZ Dupe NVMe Cyclone 600 copies one source drive to up to nine targets at 600 MB/s. It operates without a host PC and accepts M.2 NVMe and SATA modules as well as 2.5" and 3.5" SATA drives. The unit is built for IT teams and data centres that need fast, verified duplication.

600 MB/s throughput with 18 TB+ support

Each copy job can handle drives beyond 18 TB using MBR or GPT partitioning. Five copy modes — Whole Media, System and Files, All Partitions, Percentage and Non-zero — let you match the workflow to the data set. The 128 MB buffer and Athena controller sustain the rated speed across all nine slots.

Daisy-chain scaling with AC 115-230 V supply

Up to 255 units can be linked for larger batch runs, reaching a combined 2,294 target capacity. The duplicator draws power from a standard 115–230 V, 50/60 Hz source. Indicator lights show slot status while real-time copy-and-compare and downloadable event logs verify every operation.

أبرز المميزات

  • Copies up to 9 drives simultaneously at 600MB/s
  • Five NVMe copy modes including Whole Media and Percentage
  • Eight erase modes from Quick Erase to DoD 7-Pass
  • Real-time copy-and-compare verifies each section during duplication
  • Daisy-chain up to 255 units for massive parallel jobs

المواصفات

BrandEZ Dupe
TypeM.2 NVME Duplicator
ModelNVME Cyclone 600
Part NumberDM-HE6-5M09PP
Panel ColorBlack
Operating TypeStandalone
ConnectorM.2 NVME / Hard Drive SATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaM.2 NVME / SATA Hard Drive Disk / Solid State Drive
Data Transfer Rate600MB/s
Load TypeSlot
Key FeaturesSATA Hard Drive connection
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the duplicator's SATA ports let me copy from my existing 3.5" and 2.5" SATA HDDs to the nine M.2 NVMe target slots?

Yes, the unit supports crossover duplication between SATA hard drives and M.2 NVMe SSDs using its built-in SATA connectors for 3.5" and 2.5" drives.

How can I verify the duplicator copied data correctly using its built-in quality check?

The quality-check function tests bad-sector count, actual capacity, average read speed and average write speed on each destination drive after the copy finishes.

Which cables or adapters are included for connecting M.2 NVMe, M.2 SATA and SATA drives to the nine target slots?

The duplicator uses direct slot loading for M.2 modules and onboard SATA ports for 2.5" and 3.5" drives; no separate cables or adapters are mentioned.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.