Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Hetai Tech

Hetai Tech 2.5" SATA HDD/SSD Enclosure USB 3.0 7mm/9mm

SKU CH-3R7R-7XNGF

A 2.5 inch SATA hard-drive or SSD enclosure with USB 3.0 that fits 7 mm and 9 mm drives

  • TypeEnclosure
  • Fits 2.5 inch SATA drives up to 9 mm thick
  • USB 3.0 interface enables fast data transfer
  • Tool-free design allows quick drive installation
  • Compact enclosure protects drive during transport
  • Supports both HDD and SSD in one case

External 2.5″ SATA drive enclosure

This Hetai Tech enclosure turns a 2.5″ SATA hard drive or SSD into an external USB 3.0 storage device. It accepts both 7 mm and 9 mm drive heights and draws power directly from the USB port. No drive is included in the package.

Suits owners of spare 2.5″ SATA drives

Ideal for users who want to access data from a laptop drive on another computer or create a portable backup volume. Not suitable for anyone needing to connect a 3.5″ desktop drive or an M.2 form-factor module.

USB 3.0 host interface

The enclosure connects to the host via a standard USB 3.0 cable, providing a single specification that determines transfer performance and compatibility with your computer's ports.

Kohokohdat

  • Fits 2.5 inch SATA drives up to 9 mm thick
  • USB 3.0 interface enables fast data transfer
  • Tool-free design allows quick drive installation
  • Compact enclosure protects drive during transport
  • Supports both HDD and SSD in one case

Tekniset tiedot

TypeEnclosure

Kysymyksiä tästä tuotteesta

Does this enclosure accept both 7 mm and 9 mm thick 2.5 inch SATA drives?

Yes, the enclosure supports 2.5 inch SATA drives with either 7 mm or 9 mm thickness.

How is the drive installed and what step is commonly missed?

Slide the 2.5 inch SATA drive into the tray, connect the SATA connector, then secure the tray with the screws provided; the step often missed is tightening those screws so the drive cannot shift.

What part might need replacement after extended use?

The USB 3.0 cable or the internal SATA-to-USB bridge board can wear out and may need replacing later.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.