Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Hetai Tech

Hetai Tech 2.5" SATA HDD/SSD Enclosure USB 3.0 7mm/9mm

SKU CH-3R7R-7XNGF

A 2.5 inch SATA hard-drive or SSD enclosure with USB 3.0 that fits 7 mm and 9 mm drives

  • TypeEnclosure
  • Fits 2.5 inch SATA drives up to 9 mm thick
  • USB 3.0 interface enables fast data transfer
  • Tool-free design allows quick drive installation
  • Compact enclosure protects drive during transport
  • Supports both HDD and SSD in one case

External 2.5″ SATA drive enclosure

This Hetai Tech enclosure turns a 2.5″ SATA hard drive or SSD into an external USB 3.0 storage device. It accepts both 7 mm and 9 mm drive heights and draws power directly from the USB port. No drive is included in the package.

Suits owners of spare 2.5″ SATA drives

Ideal for users who want to access data from a laptop drive on another computer or create a portable backup volume. Not suitable for anyone needing to connect a 3.5″ desktop drive or an M.2 form-factor module.

USB 3.0 host interface

The enclosure connects to the host via a standard USB 3.0 cable, providing a single specification that determines transfer performance and compatibility with your computer's ports.

I korthet

  • Fits 2.5 inch SATA drives up to 9 mm thick
  • USB 3.0 interface enables fast data transfer
  • Tool-free design allows quick drive installation
  • Compact enclosure protects drive during transport
  • Supports both HDD and SSD in one case

Specifikationer

TypeEnclosure

Frågor om den här produkten

Does this enclosure accept both 7 mm and 9 mm thick 2.5 inch SATA drives?

Yes, the enclosure supports 2.5 inch SATA drives with either 7 mm or 9 mm thickness.

How is the drive installed and what step is commonly missed?

Slide the 2.5 inch SATA drive into the tray, connect the SATA connector, then secure the tray with the screws provided; the step often missed is tightening those screws so the drive cannot shift.

What part might need replacement after extended use?

The USB 3.0 cable or the internal SATA-to-USB bridge board can wear out and may need replacing later.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.