Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

HP

HP ProLiant DL160 Gen9 1U rack server 2× Xeon E5-2623v3 32GB DDR4 2× 1TB SATA

SKU CH-TGAB-B5F54

1U rack server with dual Xeon E5-2623v3 CPUs, 32GB DDR4 and two 1TB SATA drives

  • TypeRack
  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon E5 v3
  • MAX Processors2
  • ChipsetIntel C610

Installed Memory Size 32GB

HDD 2 x 1TB

  • Dual Xeon E5-2623v3 CPUs deliver 16 virtual cores for parallel workloads
  • 32GB DDR4 ECC memory supports data integrity across 16 DIMM slots
  • Two 1TB 7.2K SATA drives provide mirrored storage via B140i RAID 1
  • Redundant 550W hot-swap power supplies maintain uptime during module replacement
  • 1U rack form factor fits dense deployments with eight 2.5-inch drive bays

Compact 1U rack server for dual-socket workloads

The HP ProLiant DL160 Gen9 fits a single rack unit and ships with two Xeon E5-2623v3 quad-core processors, 32 GB of DDR4 memory and a pair of 1 TB 7.2 K SATA drives. The B140i software RAID controller supports RAID 0, 1 and 5 on SATA media only. Redundant hot-swap power supplies and eight 2.5-inch drive bays provide room for expansion within the same chassis.

Suited for SATA-only deployments.

This platform works for buyers who want a ready-to-run dual-socket server with software RAID on SATA drives. It is not suited for buyers who need a hardware RAID controller, SAS connectivity, more than two internal drives without adding a controller, or support for memory types other than DDR4. The installed 32 GB already reaches the listed maximum capacity.

B140i software RAID limited to SATA RAID 0, 1, 5

The storage controller is the deciding specification: it provides software RAID levels 0, 1 and 5 exclusively for SATA drives. If your workload requires hardware RAID acceleration, SAS drive support or a different RAID level, this server will not meet that requirement without an additional controller.

Kohokohdat

  • Dual Xeon E5-2623v3 CPUs deliver 16 virtual cores for parallel workloads
  • 32GB DDR4 ECC memory supports data integrity across 16 DIMM slots
  • Two 1TB 7.2K SATA drives provide mirrored storage via B140i RAID 1
  • Redundant 550W hot-swap power supplies maintain uptime during module replacement
  • 1U rack form factor fits dense deployments with eight 2.5-inch drive bays

Tekniset tiedot

BrandHP
SeriesProLiant
ModelProliant DL160 G9
TypeRack
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon E5 v3
MAX Processors2
ChipsetIntel C610
Installed Memory Size32GB
Memory TypeDDR4
Max Memory Capacity32GB
Memory Features16 DIMM slots, 8 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability).
Number of Memory Slots16
Storage ControllerB140i Software RAID
HDD InterfaceSATA
SSD (Installed)No
Raid Level0,1,5
Media DrivesNone
GPU TypeMatrox G200
Video Memory16MB
Remote ManagementiLO Management (standard).
LAN Ports2 x Ports
Expansion SlotsCPU1 PCIe Riser 1: 2 PCIe 3.0 Slots (1 & 2) available: 1x Full-Height Half Length, 1x Low Profile slot. Optional kit available to install Flexible LOM in slot 1. CPU 2 Riser (Optional): PCIe 3.0 slot 3 - Full-Height Half Height (Secondary PCIe Riser and dual CPU required).
Operating SystemNo
Compatible/Certified OSMicrosoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris
Weight63.0000LBS

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What RAID levels does the B140i controller support and what interface does it handle?

The B140i software RAID controller supports RAID 0, 1 and 5 and handles SATA drives only.

How many drive bays does the 1U chassis provide and what size drives do they accept?

The chassis provides 8 SFF bays that accept 2.5 inch drives.

How are the two 1TB drives installed and what step is often missed?

The drives mount in the included trays and slide into the front bays; the RAID array must be created in the B140i BIOS before installing an OS.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.