Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
2.5 inch SAS drive in a smart carrier with hot-swap handle

HPE

HPE P06576-001 400GB SAS 12G 2.5" SFF enterprise SSD

SKU CH-T0ZB-2T6WV

A 400 GB enterprise SAS SSD with a 12 Gb/s interface and hot-swap 2.5" SFF form factor

  • InterfaceSAS 12Gb/s
  • Capacity400GB
  • FeaturesHot Swap
  • Form Factor2.5 Inches SFF
  • Height (maximum)0.6"
  • Width (maximum)2.5"
  • 400 GB capacity handles mixed-use workloads
  • 12 Gb/s SAS interface delivers fast data throughput
  • 5-inch SFF form factor fits dense server bays
  • Hot-swap support enables drive changes without downtime
  • 20 W operating power reduces energy draw

400 GB SAS 12Gb/s mixed-use drive

This 400 GB SAS solid-state drive is built for mixed-use workloads in enterprise servers. It connects over a 12Gb/s SAS interface and fits a 2.5-inch SFF bay with a smart carrier for hot-swap operation. The unit draws 4.20 W while operating and is sold new from HPE.

Hot-swap carrier eases installation

The smart carrier allows the drive to be inserted or removed while the server stays powered on. Slide the carrier into the bay until the latch engages; no cables are required because power and data route through the backplane. The most common issue is a partially seated carrier, which leaves the drive invisible to the RAID controller.

Verify SAS backplane and 2.5-inch bay

Confirm the server provides a 2.5-inch SFF slot wired for 12Gb/s SAS and that the backplane supports hot-swap SAS devices. Check that the RAID controller or HBA lists this part number in its compatibility matrix. A SATA-only backplane will not recognise the drive.

Kohokohdat

  • 400 GB capacity handles mixed-use workloads
  • 12 Gb/s SAS interface delivers fast data throughput
  • 5-inch SFF form factor fits dense server bays
  • Hot-swap support enables drive changes without downtime
  • 20 W operating power reduces energy draw

Tekniset tiedot

BrandHP
InterfaceSAS 12Gb/s
Capacity400GB
FeaturesHot Swap
Form Factor2.5 Inches SFF
Height (maximum)0.6"
Width (maximum)2.5"

Kysymyksiä tästä tuotteesta

How do I confirm the drive is recognised and healthy after installing it in the server?

The server BIOS or RAID controller should report a 400 GB SAS device at 12 Gb/s; SMART data will show zero reallocated sectors and normal temperature under load.

What ships with the drive and what must be sourced separately?

The unit includes the 2.5" SFF smart-carrier SSD; rails, cables, caddies and any HPE Smart Array controller are not supplied.

Which capacity and interface version should I select for a mixed-use SAS array?

This model provides 400 GB over a 12 Gb/s SAS link; choose it when the workload demands that capacity and speed combination.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.