HPE
HPE P06576-001 400GB SAS 12G 2.5" SFF enterprise SSD
A 400 GB enterprise SAS SSD with a 12 Gb/s interface and hot-swap 2.5" SFF form factor
- InterfaceSAS 12Gb/s
- Capacity400GB
- FeaturesHot Swap
- Form Factor2.5 Inches SFF
- Height (maximum)0.6"
- Width (maximum)2.5"
- 400 GB capacity handles mixed-use workloads
- 12 Gb/s SAS interface delivers fast data throughput
- 5-inch SFF form factor fits dense server bays
- Hot-swap support enables drive changes without downtime
- 20 W operating power reduces energy draw
400 GB SAS 12Gb/s mixed-use drive
This 400 GB SAS solid-state drive is built for mixed-use workloads in enterprise servers. It connects over a 12Gb/s SAS interface and fits a 2.5-inch SFF bay with a smart carrier for hot-swap operation. The unit draws 4.20 W while operating and is sold new from HPE.
Hot-swap carrier eases installation
The smart carrier allows the drive to be inserted or removed while the server stays powered on. Slide the carrier into the bay until the latch engages; no cables are required because power and data route through the backplane. The most common issue is a partially seated carrier, which leaves the drive invisible to the RAID controller.
Verify SAS backplane and 2.5-inch bay
Confirm the server provides a 2.5-inch SFF slot wired for 12Gb/s SAS and that the backplane supports hot-swap SAS devices. Check that the RAID controller or HBA lists this part number in its compatibility matrix. A SATA-only backplane will not recognise the drive.
Pluspunten
- 400 GB capacity handles mixed-use workloads
- 12 Gb/s SAS interface delivers fast data throughput
- 5-inch SFF form factor fits dense server bays
- Hot-swap support enables drive changes without downtime
- 20 W operating power reduces energy draw
Specificaties
| Brand | HP |
|---|---|
| Interface | SAS 12Gb/s |
| Capacity | 400GB |
| Features | Hot Swap |
| Form Factor | 2.5 Inches SFF |
| Height (maximum) | 0.6" |
| Width (maximum) | 2.5" |
Vragen over dit artikel
How do I confirm the drive is recognised and healthy after installing it in the server?
The server BIOS or RAID controller should report a 400 GB SAS device at 12 Gb/s; SMART data will show zero reallocated sectors and normal temperature under load.
What ships with the drive and what must be sourced separately?
The unit includes the 2.5" SFF smart-carrier SSD; rails, cables, caddies and any HPE Smart Array controller are not supplied.
Which capacity and interface version should I select for a mixed-use SAS array?
This model provides 400 GB over a 12 Gb/s SAS link; choose it when the workload demands that capacity and speed combination.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
