Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black metal tray holding three 2.5 inch drives in one 3.5 inch bay

ICY DOCK

ICY DOCK MB993SK-B ToughArmor 3 x 2.5" SAS SATA to 3.5" bay hdd accessory

SKU CH-JZR1-9JJPD MPN MB993SK-B

Fits three 2.5 inch SAS or SATA drives into one 3.5 inch bay with full metal construction and individual LEDs

  • ColorBlack
  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products3 x 2.5” SATA III HDD & SSD Up to 7mm height (Supports SAS S

Model ToughArmors 3BAY

Näytä 4 muuta kokoonpanoa

Option 1-Bay

  • Fits three 2.5″ drives in one 3.5″ bay
  • Full metal build meets flammability standards
  • SAS and SATA at 6Gbps with 3Gbps backward compatibility
  • Individual LED per drive shows status
  • Suited for medical, military and industrial PCs

Triple 2.5" drive bay adapter

The ICY DOCK MB993SK-B fits three 2.5" SATA or SAS drives into one external 3.5" front bay. It targets builders who need high storage density in compact industrial, medical or embedded systems. The full-metal chassis meets flammability requirements for rugged environments. Each drive tray slides in and out for quick swaps.

SATA 6 Gbps interface ceiling

Three SATA 7-pin host ports connect the drives to the system at up to 6 Gbps per port. Actual throughput depends on the installed drive and the host controller. SAS drives require a SAS host and operate on a single channel. The enclosure is backward compatible with 3 Gbps SATA drives and hosts.

Verify bay depth and power connector

Confirm the chassis provides a standard 3.5" front device bay with enough depth for the full-metal cage. The unit draws power through a single floppy 4-pin connector, so a matching lead from the PSU is required. Drives must be 7 mm high or thinner; taller 2.5" drives will not fit.

Kohokohdat

  • Fits three 2.5″ drives in one 3.5″ bay
  • Full metal build meets flammability standards
  • SAS and SATA at 6Gbps with 3Gbps backward compatibility
  • Individual LED per drive shows status
  • Suited for medical, military and industrial PCs

Tekniset tiedot

BrandICY DOCK
ModelMB993SK-B
ColorBlack
Part NumberMB993SK-B
Conversion Tray1 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products3 x 2.5” SATA III HDD & SSD Up to 7mm height
(Supports SAS Single Channel)
SpecificationsDrive Bay :
1 x 3.5” front device bay
Host Interface :
3 x SATA 7 pin
Power Input :
1 x Floppy 4 pin power
Maximum Transfer Rate :
Up to 6Gb/sec (Depending on hard drive speed)
HDD Access Indicator :
Empty bay: LED off
HDD idle: Solid green
HDD Fail: Solid red
HDD access: Flashing green
Hot Swap :
Yes
Drive Cooling :
Airflow vents with metal heat dissipation
Drive Security :
2 segment key lock
Structure :
Full Metal
Dimension (L x W x H) :
133 x 101.2 x 25.4mm
Weight :
370g
Package contents :
Device, user manual, screws, keys
FeaturesSuggested applications in medical & military systems, government agencies, Industrial PC, SMB workstation, VM workstation, mobile DVR system, aerospace computer, automation system and embedded system.
Full Metal construction, perfect for rugged applications and complies with flammability requirement
Fits 3 x 7mm 2.5” SATA HDD or SSD in a 3.5” floppy drive bay.
Supports SAS or SATA HDD/SSD at 6Gbps and is backwards compatible with SATA 3Gbps drives and hosts (SAS host is required for SAS drives - Single SAS channel
Individual LED indicators
Multi-Flow Technology (MFT) - provides excel
Lähetyspaino0.44 kg
Pakkauksen mitat178 × 114 × 36 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Which drive height does the MB993SK-B accept?

The tray holds three 2.5 inch SATA or SAS drives up to 7 mm tall, fitting them into one 3.5 inch front bay.

What does the 6 Gbps rating mean once the unit is installed?

Each drive connects through its own SATA 6 Gbps link, so actual throughput matches the drive’s own speed up to that ceiling.

What interface standard does the MB993SK-B use and what does it limit?

It uses three SATA 7-pin host ports, capping each drive at SATA 6 Gbps and requiring a SAS host for SAS drives.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.