ICY DOCK MB411SPO-2B 2.5" SATA HDD/SSD mobile rack for 9.5mm ultra slim ODD bay
- Black
- 1 x 2.5" Drive to 5…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ICY DOCK
Converts a 3.5" bay for one 2.5" SATA or SAS drive with a lockable metal tray
Model ToughArmors 1BAY+LOCK
Option 1-Bay (2.5in SATA/SAS)
The ICY DOCK MB491SKL-B fits a single 2.5" SATA or SAS drive into a standard 3.5" front bay. It accepts 7mm, 9.5mm, 12.5mm and 15mm drive heights. A removable metal tray with key lock and thumb screw secures the drive. The unit supports up to 6 Gb/sec per channel.
Verify that your system provides a 3.5" SAS drive bay with a 14 pin SAS backplane connector and a 15 pin power connector. The host must support SAS for SAS drives; SATA drives work on SATA controllers. Ensure the front panel allows tray insertion and removal.
The full metal cage enables hot-swap capability for one drive without tools. It occupies one 3.5" bay and connects directly to the backplane. The tray design frees internal space by keeping the drive accessible from the front. No additional cables or brackets are required for installation.
| Brand | ICY DOCK |
|---|---|
| Model | MB491SKL-B |
| Color | Chrome |
| Conversion Tray | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III/SAS |
| Protection Case | Single Drive |
| Compatible Products | 2.5” SAS or SATA HDD/SSD (SAS host required) |
| Specifications | Compatible Drive Heights : 7mm, 9.5mm, 12.5mm &15mm Device Interface: 14 pin SAS (Dual Channel) Power Input: 15 pin power connector Device Fit : 3.5" SAS drive bay Transfer Rate : Up to 6 Gb/sec per channel (depending on hard drive speed) Material : Stainless steel Dimension (L x W x H) : 146.6 x 25.4 x 101.6mm Weight : 210g Package Contentst : Device, user manual, screws |
| Lähetyspaino | 0.45 kg |
| Pakkauksen mitat | 154 × 110 × 38 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The package includes the full-metal mobile rack cage, one removable EX-Secure Mini Tray, a metal key lock and thumb screws for installation. You must supply your own 2.5" SATA or SAS drive and have a 3.5" front bay with SAS backplane.
The tray accepts 2.5" drives measuring 7 mm, 9.5 mm, 12.5 mm and 15 mm thick, covering standard SATA and SAS SSDs and HDDs in a single version.
Each SAS lane delivers up to 6 Gb/s, so a SATA III SSD runs at its full 6 Gb/s speed while a dual-channel SAS drive can use both lanes for higher throughput.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?