NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
A 64 GB dual-channel DDR5 kit running at 5600 MT/s with CL36 latency and 1.25 V operation
This dual-channel kit delivers 64GB of DDR5 memory across two 32GB modules rated at 5600 MT/s with a CL36 36-36-36-76 timing at 1.25V. It is built for desktop systems that require high capacity and fast JEDEC-standard performance.
The kit includes AMD EXPO and Intel XMP 3.0 profiles for automatic configuration on supporting motherboards. Buyers whose boards only offer older XMP revisions or lack EXPO support should verify compatibility before purchase.
The modules run at DDR5-5600 (PC5-44800) with a tested latency of 36-36-36-76 and a 1.25V operating voltage. If the motherboard cannot supply this voltage or does not support DDR5-5600, the memory will fall back to SPD defaults.
| Brand | Kingston |
|---|---|
| Series | FURY Beast |
| Model | KF556C40BBAK2-64 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL36 |
| Timing | 36-36-36-76 |
| Voltage | 1.25V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | AMD EXPO / Intel XMP 3.0 / Intel XMP 3.0 and AMD EXPO |
| Color | Black |
| Features | Kingston FURY KF556C40BBAK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-5600 CL40 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-5600 at a low latency timing of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. |
| Recommend Use | AMD & Intel Compatible / AMD 500 Series / AMD B550 / AMD Ryzen Compatible / AMD X570 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z490 / Intel Z590 / Intel Z690 |
| LED Color | RGB |
| Lähetyspaino | 0.11 kg |
| Pakkauksen mitat | 147 × 122 × 13 mm |
The kit is listed as compatible with AMD X570 and Ryzen. It supports AMD EXPO and Intel XMP 3.0 profiles. Enable the appropriate profile in BIOS to reach the rated DDR5-5600 CL36 timing at 1.25V.
Yes, the modules are tested at 1.25V for the DDR5-5600 CL36 profile. The SPD also contains a JEDEC fallback at 1.1V for DDR5-4800. Your board must support the 1.25V setting for the rated speed.
Without enabling a profile the modules will run at the JEDEC standard DDR5-4800 with timings of 40-39-39 at 1.1V.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?