Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
A 64 GB dual-channel DDR5 kit running at 5600 MT/s with CL36 latency and 1.25 V operation
This dual-channel kit delivers 64GB of DDR5 memory across two 32GB modules rated at 5600 MT/s with a CL36 36-36-36-76 timing at 1.25V. It is built for desktop systems that require high capacity and fast JEDEC-standard performance.
The kit includes AMD EXPO and Intel XMP 3.0 profiles for automatic configuration on supporting motherboards. Buyers whose boards only offer older XMP revisions or lack EXPO support should verify compatibility before purchase.
The modules run at DDR5-5600 (PC5-44800) with a tested latency of 36-36-36-76 and a 1.25V operating voltage. If the motherboard cannot supply this voltage or does not support DDR5-5600, the memory will fall back to SPD defaults.
| Brand | Kingston |
|---|---|
| Series | FURY Beast |
| Model | KF556C40BBAK2-64 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL36 |
| Timing | 36-36-36-76 |
| Voltage | 1.25V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | AMD EXPO / Intel XMP 3.0 / Intel XMP 3.0 and AMD EXPO |
| Color | Black |
| Features | Kingston FURY KF556C40BBAK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-5600 CL40 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-5600 at a low latency timing of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. |
| Recommend Use | AMD & Intel Compatible / AMD 500 Series / AMD B550 / AMD Ryzen Compatible / AMD X570 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z490 / Intel Z590 / Intel Z690 |
| LED Color | RGB |
| Shipping weight | 0.11 kg |
| Package size | 147 × 122 × 13 mm |
The kit is listed as compatible with AMD X570 and Ryzen. It supports AMD EXPO and Intel XMP 3.0 profiles. Enable the appropriate profile in BIOS to reach the rated DDR5-5600 CL36 timing at 1.25V.
Yes, the modules are tested at 1.25V for the DDR5-5600 CL36 profile. The SPD also contains a JEDEC fallback at 1.1V for DDR5-4800. Your board must support the 1.25V setting for the rated speed.
Without enabling a profile the modules will run at the JEDEC standard DDR5-4800 with timings of 40-39-39 at 1.1V.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?