Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two black DDR5 memory sticks with RGB lighting, 64GB kit

Kingston Technology Corp.

Kingston Technology Corp. KF556C36BBEAK2-64 64GB (2×32GB) DDR5-5600 CL36 desktop RAM

SKU CH-DCYX-DXDKE MPN KF556C36BBEAK2-64

A 64 GB dual-channel DDR5 kit running at 5600 MT/s with CL36 latency and 1.25 V operation

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-36-36-76
  • Voltage1.25V
  • 64 GB total capacity from two 32 GB modules
  • DDR5-5600 speed rated at PC5 44800 bandwidth
  • Low CL36 latency with 36-36-36-76 timings
  • Runs at 1.25 V for efficient DDR5 operation
  • Dual-channel kit with Intel XMP 3.0 and AMD EXPO profiles

Kingston FURY Beast 64GB DDR5-5600 CL36 Kit

This dual-channel kit delivers 64GB of DDR5 memory across two 32GB modules rated at 5600 MT/s with a CL36 36-36-36-76 timing at 1.25V. It is built for desktop systems that require high capacity and fast JEDEC-standard performance.

Suits AMD Ryzen and Intel platforms with EXPO

The kit includes AMD EXPO and Intel XMP 3.0 profiles for automatic configuration on supporting motherboards. Buyers whose boards only offer older XMP revisions or lack EXPO support should verify compatibility before purchase.

288-pin DDR5-5600 CL36 at 1.25V decides fit

The modules run at DDR5-5600 (PC5-44800) with a tested latency of 36-36-36-76 and a 1.25V operating voltage. If the motherboard cannot supply this voltage or does not support DDR5-5600, the memory will fall back to SPD defaults.

Puncte forte

  • 64 GB total capacity from two 32 GB modules
  • DDR5-5600 speed rated at PC5 44800 bandwidth
  • Low CL36 latency with 36-36-36-76 timings
  • Runs at 1.25 V for efficient DDR5 operation
  • Dual-channel kit with Intel XMP 3.0 and AMD EXPO profiles

Specificații

BrandKingston
SeriesFURY Beast
ModelKF556C40BBAK2-64
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-36-36-76
Voltage1.25V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileAMD EXPO / Intel XMP 3.0 / Intel XMP 3.0 and AMD EXPO
ColorBlack
FeaturesKingston FURY KF556C40BBAK2-64 is a kit of two 4G x 64-bit (32GB) DDR5-5600 CL40 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-5600 at a low latency timing of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
Recommend UseAMD & Intel Compatible / AMD 500 Series / AMD B550 / AMD Ryzen Compatible / AMD X570 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z490 / Intel Z590 / Intel Z690
LED ColorRGB
Greutate la expediere0.11 kg
Dimensiunile coletului147 × 122 × 13 mm

Întrebări despre acest articol

Will this kit run at DDR5-5600 CL36 on an AMD X570 board with a Ryzen CPU?

The kit is listed as compatible with AMD X570 and Ryzen. It supports AMD EXPO and Intel XMP 3.0 profiles. Enable the appropriate profile in BIOS to reach the rated DDR5-5600 CL36 timing at 1.25V.

Does the 1.25V operating voltage require a motherboard that can supply that level?

Yes, the modules are tested at 1.25V for the DDR5-5600 CL36 profile. The SPD also contains a JEDEC fallback at 1.1V for DDR5-4800. Your board must support the 1.25V setting for the rated speed.

What is the default speed if I do not enable an EXPO or XMP profile?

Without enabling a profile the modules will run at the JEDEC standard DDR5-4800 with timings of 40-39-39 at 1.1V.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.