Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular memory module with black chips and gold edge contacts

Kingston Technology Corp.

Kingston Technology Corp. KVR333/1GR 1GB DDR 333 (PC 2700) desktop RAM

SKU CH-VN4G-83Z40 MPN KVR333/1GR

1GB DDR 333 desktop memory module rated at PC 2700 with CL2.5 latency and 2.50V operation

  • Capacity1GB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Voltage2.50V
  • ECCNo
  • Heat SpreaderNo
  • 1GB capacity for everyday desktop tasks
  • DDR 333 (PC 2700) speed for reliable data throughput
  • CL2.5 latency for responsive memory access
  • 50V operation matching standard DDR voltage
  • ValueRAM quality built to JEDEC specifications

Kingston ValueRAM 1GB DDR 333 Module

This Kingston ValueRAM module provides 1GB of DDR 333 memory rated at PC 2700. It targets budget-conscious system builders and assemblers who need standard-compliant desktop RAM for older platforms. The stick operates at 2.50V with a CAS latency of CL2.5 and ships without a heat spreader. It suits basic office or legacy repair work where capacity needs are modest.

Standard specification only

ValueRAM follows JEDEC 'by spec' timings so there are no enhanced profiles, overclocking headroom or bundled software utilities. The CL2.5 latency and 2.50V voltage are fixed at the rated 333 MHz speed. Builders receive exactly the rated density and frequency without extra accessories or tuning options. This keeps the component predictable for white-box integration.

DDR 333 interface limits

The DDR 333 (PC 2700) interface caps bandwidth at the rated 2700 MB/s theoretical maximum. Latency is bound by the CL2.5 timing at 2.50V with no ECC error correction available. Systems requiring higher throughput, lower latency or error-checking must use a different memory standard. This module cannot exceed its specified transfer rate or voltage.

Kohokohdat

  • 1GB capacity for everyday desktop tasks
  • DDR 333 (PC 2700) speed for reliable data throughput
  • CL2.5 latency for responsive memory access
  • 50V operation matching standard DDR voltage
  • ValueRAM quality built to JEDEC specifications

Tekniset tiedot

BrandKingston
SeriesValueRAM
ModelKVR333/1GR
Capacity1GB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Voltage2.50V
ECCNo
Heat SpreaderNo
Lähetyspaino0.01 kg
Pakkauksen mitat184 × 133 × 19 mm

Kysymyksiä tästä tuotteesta

Will the 1 GB DDR 333 module need a heat spreader added later?

The module ships without a heat spreader and runs at the standard 2.5 V, so no extra cooling is required under normal desktop loads.

What limit appears first when the memory runs continuously at PC 2700 speed?

The fixed CAS latency of CL2.5 sets the timing ceiling; bandwidth cannot exceed the DDR 333 spec during sustained use.

How much heat and power does the stick produce when the system stays on all day?

At 2.5 V the module draws only the power defined by the DDR 333 standard, generating minimal heat without a spreader.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.