NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Kingston Technology Corp.
1GB DDR 333 desktop memory module rated at PC 2700 with CL2.5 latency and 2.50V operation
This Kingston ValueRAM module provides 1GB of DDR 333 memory rated at PC 2700. It targets budget-conscious system builders and assemblers who need standard-compliant desktop RAM for older platforms. The stick operates at 2.50V with a CAS latency of CL2.5 and ships without a heat spreader. It suits basic office or legacy repair work where capacity needs are modest.
ValueRAM follows JEDEC 'by spec' timings so there are no enhanced profiles, overclocking headroom or bundled software utilities. The CL2.5 latency and 2.50V voltage are fixed at the rated 333 MHz speed. Builders receive exactly the rated density and frequency without extra accessories or tuning options. This keeps the component predictable for white-box integration.
The DDR 333 (PC 2700) interface caps bandwidth at the rated 2700 MB/s theoretical maximum. Latency is bound by the CL2.5 timing at 2.50V with no ECC error correction available. Systems requiring higher throughput, lower latency or error-checking must use a different memory standard. This module cannot exceed its specified transfer rate or voltage.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR333/1GR |
| Capacity | 1GB |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | No |
| Heat Spreader | No |
| Verzendgewicht | 0.01 kg |
| Pakketafmetingen | 184 × 133 × 19 mm |
The module ships without a heat spreader and runs at the standard 2.5 V, so no extra cooling is required under normal desktop loads.
The fixed CAS latency of CL2.5 sets the timing ceiling; bandwidth cannot exceed the DDR 333 spec during sustained use.
At 2.5 V the module draws only the power defined by the DDR 333 standard, generating minimal heat without a spreader.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?