NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Kingston Technology Corp.
1GB DDR 333 desktop memory module rated at PC 2700 with CL2.5 latency and 2.50V operation
This Kingston ValueRAM module provides 1GB of DDR 333 memory rated at PC 2700. It targets budget-conscious system builders and assemblers who need standard-compliant desktop RAM for older platforms. The stick operates at 2.50V with a CAS latency of CL2.5 and ships without a heat spreader. It suits basic office or legacy repair work where capacity needs are modest.
ValueRAM follows JEDEC 'by spec' timings so there are no enhanced profiles, overclocking headroom or bundled software utilities. The CL2.5 latency and 2.50V voltage are fixed at the rated 333 MHz speed. Builders receive exactly the rated density and frequency without extra accessories or tuning options. This keeps the component predictable for white-box integration.
The DDR 333 (PC 2700) interface caps bandwidth at the rated 2700 MB/s theoretical maximum. Latency is bound by the CL2.5 timing at 2.50V with no ECC error correction available. Systems requiring higher throughput, lower latency or error-checking must use a different memory standard. This module cannot exceed its specified transfer rate or voltage.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR333/1GR |
| Capacity | 1GB |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | No |
| Heat Spreader | No |
| Peso de envío | 0.01 kg |
| Dimensiones del paquete | 184 × 133 × 19 mm |
The module ships without a heat spreader and runs at the standard 2.5 V, so no extra cooling is required under normal desktop loads.
The fixed CAS latency of CL2.5 sets the timing ceiling; bandwidth cannot exceed the DDR 333 spec during sustained use.
At 2.5 V the module draws only the power defined by the DDR 333 standard, generating minimal heat without a spreader.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?