Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two small grey syringes of carbon thermal paste with a plastic spreader tool

Lirealar

Lirealar TF4 Carbon Thermal Paste 9.5 W/mK 1g 2pcs with Tool

SKU CH-NED0-43E7Y MPN TF4

Carbon-based compound rated at 9.5 W/mK for CPU and GPU cooling, non-conductive and non-corrosive, supplied as two 1 g syringes with application tool

  • Volume / Net Weight1g 2Pcs
  • Thermal Conductivity9.5 W/mK,
  • Long Term Operating Temperature-50~240°C
  • SpecificationsColor:Gray Thermal resistance:<0.0068(°C-CM²/W) Density:2.7(
  • FeaturesHigh Thermal Conductivity 9.5 W/mK Non-Elecnical Conducive N

Type Thermal Paste

Model TF4

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Specification 1g

Näytä 1 muuta kokoonpanoa
  • High thermal conductivity 9.5 W/mK moves heat efficiently from CPU or GPU
  • Non-electrically conductive carbon formula eliminates short-circuit risk on sensitive components
  • Long-term stability rated for at least six years without drying or curing
  • Wide operating range from -50 °C to 240 °C suits extreme cooling setups
  • Two 1 g syringes with application tool included for convenient, repeatable use

High-Conductivity Carbon Paste

Lirealar TF4 is a carbon-based thermal compound rated at 9.5 W/mK, supplied as two 1 g syringes with an application tool. It is formulated for desktop and laptop CPUs, GPUs and LED coolers where efficient heat transfer is required. The grey paste is non-electrically conductive, non-corrosive and non-curing, so it remains stable across a -50 °C to 240 °C operating range.

Suited for Standard Replacements

This twin-pack suits builders refreshing paste on a single processor or graphics card, or keeping a spare syringe for future maintenance. The non-conductive formula removes the risk of short circuits if excess spreads beyond the die. Users needing larger volumes for multiple builds, or compounds with higher conductivity ratings for extreme overclocking, should look at alternative products.

Tool Simplifies Application

The included spreader tool helps create an even layer and reduces air voids between the die and cooler base. Because the compound does not cure or dry out, the initial application remains effective for at least six years without re-application. Electrical insulation and non-toxic composition add safety during handling and long-term use.

Kohokohdat

  • High thermal conductivity 9.5 W/mK moves heat efficiently from CPU or GPU
  • Non-electrically conductive carbon formula eliminates short-circuit risk on sensitive components
  • Long-term stability rated for at least six years without drying or curing
  • Wide operating range from -50 °C to 240 °C suits extreme cooling setups
  • Two 1 g syringes with application tool included for convenient, repeatable use

Tekniset tiedot

SeriesThermal Paste
ModelTF4 Thermal Compound Paste
Volume / Net Weight1g 2Pcs
Thermal Conductivity9.5 W/mK,
Long Term Operating Temperature-50~240°C
SpecificationsColor:Gray Thermal resistance:<0.0068(°C-CM²/W) Density:2.7(25°C) Operating temperature:-50~240°C Electrical conductivity:NO Harmless:YES Content: 1g 2Pcs
FeaturesHigh Thermal Conductivity 9.5 W/mK Non-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi lnsulation does not conduct electricity and is safe for use It will last At least for 6 years

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What CPU cooler or heatsink do I need to pair with the TF4 paste?

The TF4 paste works with any standard desktop or laptop CPU cooler and GPU heatsink; it fills microscopic gaps between the die and the cooler base to transfer heat at 9.5 W/mK.

Can I use this paste on an older processor that previously had metal-based compound?

Yes, the carbon-based TF4 is non-electrically conductive and non-corrosive, so it will not cause short circuits or degrade older CPU lids or GPU dies.

How can I verify the paste is performing correctly after application?

Monitor CPU or GPU temperatures under load; the paste operates from -50 to 240 °C with thermal resistance below 0.0068 °C·cm²/W and remains stable for at least six years.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.